Operating Mode - Post Processing; Keep Mesh - Zimmer Biomet Zfx EvolutionNEXT Manual

4.6 Operating mode – Post Processing
The Post Processing operating mode assists the user in the subsequent
processing and preparation of the scan data.
The scanning step can be displayed or hidden by clicking the images.
If an image is marked with a
Processing functions are launched by clicking the left mouse button
Processing icon
on the or the descriptive text.
Possible functions are:

1 Keep mesh

→ see Chapter 4.7.1
2 Fill holes
→ see Chapter 4.7.2
3 Filter mesh
→ see Chapter 4.7.3
4 Align mesh
→ see Chapter 4.7.4
5 Export
→ see Chapter 4.7.5
6 Compare
→ see Chapter 4.7.6
4.7.1 Keep mesh
By selecting the "Keep mesh" function with the left mouse button, only the individual view of the
selected scan situation is shown and all other scan situations are hidden.
NOTE
Refer back for full information on the toolbar functions (→ Chapter 3.4) and the mouse button and keyboard commands
(→ Chapter 4.2)
, this means that the view is hidden.
1
2
3
4
5
6
39