Table of Contents
Advertisement
Zfx™ EvolutionNEXT
4.7.2 Fill holes
The "Fill holes" function (Fill Holes Assistant) is an interactive
tool with which the user can complete missing 3D data
(holes) in the data set by calculation. The user has the
option of filling all holes automatically or only selected
holes.
Before filling, the hole borders are cleaned using the preset
default parameters, which results in a hole-free data set in
just a few iterations.
The borders of all surfaces are marked in yellow.
It is recommended that only the scan situation to be
processed be shown when filling holes (Keep mesh).
NOTE
CANNOT
Hole filling
All other toolbar functions (→ Chapter 3.4) as well as the mouse and keyboard commands (→ Chapter 4.2) remain active.
The control window in the Fill Hole Assistant is divided into 5 areas
4.7.2.1 Holes
In this dialog box, the number of holes is listed according to size and number of edges; the user can select individual holes.
1
Activate or deactivate all holes
2
Number of holes found taking into account
size and selection status in the "Limits" dialog box
3
Sort by diameter or number of edges
4
Activate or deactivate one hole
All holes are marked in yellow initially.
4.7.2.2 Limits
"Limits": Here, the holes to be filled can be limited according to their size and selection status.
1
The units for the "Hole size" information can optionally be
Diameter or Number of edges
2
Hole size
3
Activate size limitation
4
Activate limitation to selected areas
40
be undone (function inactive).
2
1
3
4
3
2
4
1
Advertisement
Table of Contents
