Table of Contents
Advertisement
3.4.4 Undo
Undo
The most recent commands can be undone.
In an automated procedure, such as the re-scan mode,
this button is inactive.
3.4.5 Display of 3D data
Display mode
Single color or textured display
Recommended setting: deactivated
Grid
A 2D background grid can be displayed
3.5 Operating modes
The user can access the different operating modes by clicking on the appropriate tab.
The three different operating modes are described in more detail in the following chapter.
1 Configuration
→ see Chapter 4.4
2 Scan
2
1
→ see Chapter 4.5
3 Post processing
→ see Chapter 4.6
Light sources
Setting in the "Properties" display
Axis of rotation coordinate system
The pivot point can be moved from the central position
(corresponding to the center point of the scan object
capture) to an outer pivot point (position of the mouse
determines the axis of rotation)
3
19
Advertisement
Table of Contents
