Zfx™ EvolutionNEXT
3
User interface in standard mode
When an order is registered and stored in Zfx Manager 2.0 or in the configurator, the scan button for the scan software is
enabled and the user can immediately start scanning. After starting by means of the "Scan" button, the user gains access to
the Scan operating mode level (→ 4.5 "Operating mode – Scan")
1
4
5
3.1 Glossary
RMB
Right mouse button
MWB
Mouse wheel button
LMB
Left mouse button
16
2
1 Menu selection
→ see Chapter 3.1
3
1 Information display
→ see Chapter 3.3
2 Menu selection
→ see Chapter 3.2
3 Toolbar
→ see Chapter 3.4
4 Operating modes
→ see Chapter 3.5
5 Scan Assistant
→ see Chapter 4.5.2