Commissioning; Location; Connecting The System; Connection - Zimmer Biomet Zfx EvolutionNEXT Manual

Zfx™ EvolutionNEXT
2

Commissioning

2.1 Location

Arrange the scanner, computer, monitor, keyboard and mouse to enable a comfortable working attitude.
The scanner should be easily accessible for inserting and removing objects.
NOTE
×
The scanner is an optical measuring instrument which can be damaged by a lack of care.
×
Do not expose the system to moisture (e.g. rain) or heat (due to direct sunlight).
×
Do not cover fan openings so as to ensure that adequate air circulation and cooling are maintained.
×
Avoid movement, collisions, jolts, shaking and vibration in the vicinity of the sensor while taking a measurement.
×
Do not use scan sprays inside the system.
×
Ensure a constant room temperature between 15 °C and 30 °C.
×
Keep the exposure to dust as low as possible.
CAUTION
Place the unit on a stable, flat and horizontal subsurface in order to avoid damage or injury to the equipment
and to the user.
CAUTION
A safety distance of at least 0.25 m between the scanner, wall and other objects and the user must be maintained to
ensure there is no damage to the user and the equipment during the scanning process.

2.2 Connecting the system

Connect all the cables before commissioning the components. Connect the computer to the monitor, keyboard and
mouse. Connect the scanner to the computer by means of the USB cable using the designated USB port.
CAUTION
Connecting or disconnecting cables while the system is operating can cause damage to the system.
2.3 Electrical connection
Connect the low-voltage desktop power supply cable to the scanner, and the desktop power supply to the designated mains
supply socket using the included mains cable. It is recommended that the scanner, computer and monitor be powered from a
switched socket strip with surge protection.
CAUTION
Using a non-approved power supply, mains cable or USB cable can adversely affect the operation and
electronic safety of the unit. Use only the mains cables, power supply and USB cable supplied for
connecting the equipment.
14