Control Parameters - Lauda P 10 Operation Manual

Fig. 58: List of programs in the programmer
Indicator on the Program tile in the Home
window
Fig. 59: Currently active program
6.8

Control parameters

96 / 156
2. Touch the [Programs] tile.
A list of programs appears.

3. Touch a program.
You can now edit, delete and copy the program or create a new

program.
Actions
Edit
Delete
Undo delete
Copy
New
You can start the program as soon as you have finished editing it:
Touch to start the program.

Once the program has started, you can press

A paused program can be continued by pressing

Touch to end a program that has already started.

An active or paused program is displayed on the [Programs] tile in the home
window.
The following are displayed:
The name of the program,

the segment of the program that is currently being processed,

the symbol on the tile indicates that the program has started and is

currently running or
the symbol on the tile indicates that the program has been paused.

Various control parameters for operation of the different PRO thermostat
product types have been set ex works. These control parameters are opti-
mized and installed with water as a heat transfer liquid for internal and
external control.
It may be necessary to adapt the configuration on a case by case basis,

depending on the application.
The heating capacity and viscosity of the different heat transfer liquids

influence the control behavior.
PRO bath thermostats and circulation thermostats
Description
The program can be edited or viewed without being
modified
A segment (a program line) is deleted
A delete operation can be reversed
A segment is copied and inserted under the original
segment
The program currently open is displayed as a tem-
perature-time diagram in the Cartesian coordinate
system
to pause it.
.
V6