Lauda P 10 Operation Manual page 47

ID Function
5 Query of the controlled temperature (internal/external Pt/external analog/
external serial)
7 External temperature T
8 External temperature T
14 External temperature T
25 Overtemperature turn off point T_Max
27 Limitation of outflow temperature TiH (upper limit)
29 Limitation of outflow temperature TiH (lower limit)
33 Set temperature T
tion interruption).
Table 16: Pump
ID Function
12 Flow rate
Flow controller must be connected
18 Pump power stage
Table 17: Fill level
ID Function
9 Bath level (fill level)
Table 18: Actuating signal
ID Function
11 Resolution of controller actuating signal in per mill [0.1 %]
– negative value à device is cooling
– positive value à device is heating
V6
(Pt)
E
(analog input)
E
(Pt)
E
in Safety Mode (safe set point in case of communica-
set
PRO bath thermostats and circulation thermostats
Unit, resolu- Command
tion
[°C] IN_PV_01
[°C] IN_PV_03
[°C] IN_PV_04
[°C], IN_PV_13
0.001°C
[°C] IN_SP_03
[°C] IN_SP_04
[°C] IN_SP_05
[°C] IN_SP_07
Unit Command
[l/min] IN_PV_07
[–] IN_SP_01
Unit Command
[–] IN_PV_05
Unit Command
IN_PV_06
[‰]
47 / 156