Control And Control Parameters - Lauda Integral XT 150 Operating Instructions Manual

Integral XT
Week plan
Monday
Tuesday
Wednesday 08:00 -------
Thursday
Friday
Saturday
Sunday
Pump Menu
Status
Function
Action
Set time
Set date
Pump Menu
7.15

Control and Control parameters

The control parameters are optimized ex-works for operation as a process thermostat. The parame-
ters are also preset for the operation with external control. Sometimes however, the operation of ex-
ternal containers requires adaptation. Also the thermal capacity and viscosity of the heat transfer liquid
sometimes require adaptation.
+
In order to obtain good control characteristics, the hydraulic system should provide the best possible
coupling of the object to be temperature stabilized to the thermostatic device. The following should be
fulfilled in this respect:
YAWE0028 / 24/06/2016
Time Action Time Action
07:30 Start 17:00 -------
10:00 Prog.4 17:00 -------
17:00 -------
08:00 ------- 17:00 -------
08:00 ------- 16:00 Standby
08:00 ------- 17:00 -------
08:00 ------- 17:00 -------
End T
set
Start
Standby
Program 1
Program 2
Program 3
Program 4
Program 5
End T
set
-
The intelligent menu guidance with the Master and Command detects whether you
have set the device (as described in Section 7.9.6), to internal or external control
and only displays the relevant dialog boxes in each case.
-
Some control parameters are automatically optimized by your Integral XT process
thermostat. This automatic mechanism should only be deactivated and manually
optimized in exceptional cases.
-
Week plan
the window shown on the left.
-
Using the cursor keys
field which is to be filled in.
-
Open the input dialog of the field with
an action in the action field.
-
In the example on the right the thermo-
stat is started on Monday at 7:30h, Pro-
gram 4 is executed at 10:00h on Tues-
day and the standby mode is switched in
T
fix
on Friday at 16:00h. Fields displaying
"------" are passive.
Confirm each field selection with
with
The menu
to be carried out:
-
Start
standby mode.
-
Standby
(refrigerating unit, heater and pump are
switched off).
-
Program X
defined in the programmer are pro-
cessed.
T
fix
Starting up
à
Arrange
: Select a time in the time fields and
without making changes.
Action is used to define what is
activates the thermostat from the
activates the standby mode
all actions of this program
takes you to
, select the
or quit
91