Lauda P 10 Operation Manual page 112

Displaying the product line and device type
Viewing device data
Displaying the software version
Displaying the serial numbers
112 / 156
The product line and device type are displayed directly on the menu item in
the device status menu. It is not possible to modify settings here.
LAUDA Service uses this display for diagnostic purposes. It is not possible to
modify settings here.
1. Touch the Device data menu.
Various device parameters are displayed.

The relevant versions of the installed software are required for on-site service
visits and telephone support.
1. Touch the Software version menu.
The software versions installed on the device are displayed. The

software versions of any connected solenoid valves are also dis-
played.
The serial numbers are required for on-site service visits and telephone
support.
1. Select the [Serial no.] menu item in the Device status menu.
The serial numbers of the control system, cooling system and

Command Touch remote control unit are displayed.
PRO bath thermostats and circulation thermostats V6