Lauda P 10 Operation Manual page 40

Checking the LAN network
Fig. 18: Example for entering the ping command
40 / 156
9.
Test the connection with Ä "Checking the LAN network"
on page 40 or Ä "Check the LAN network and the process inter-
face" on page 41.
1.
Start the Windows command processor by entering cmd.exe@ on
the PC with Microsoft Windows operating system.
The entry window will open.

2. There are two ways of checking:
Enter the ping command together with the IP address.

ping XXX.XXX.XXX.XXX@
For "XXX.XXX.XXX.XXX", put the IP address that was entered
when the Ethernet interface was configured.
Or
Enter the ping command together with the serial number of the

thermostatic circulator (possible with software control system
1.36 or later).
ping serial number@
If the Ethernet interface is configured and connected correctly,

the interface will return four responses within a very short time.
See Fig. 18.
PRO bath thermostats and circulation thermostats V6