Entry Window - Lauda P 10 Operation Manual

Fig. 28: Home window 2

5.6.2 Entry window

Entry window for selecting options
Fig. 29: Selecting options
Input window for entering values manually
Fig. 30: Entering values
V6
Displaying the temperature profile
Enlarge the temperature profile on the screen:

Tap the [Maximize] button at the bottom center of the home window.
Enlarge or reduce the temperature profile:

Drag the temperature profile open or closed with your fingers
Ä Chapter 5.6.3 "Graph window" on page 68.
Switch from the temperature profile back to the home window:

Tap the [Minimize] button in the upper right corner of the graph window.
The Command Touch settings are configured in the input windows. There are
two variants of input windows.
The check mark indicates the active function.

Press the [<] button to return to the previous screen without saving any

changes.
Touch a different button to select a new setting. No further confirmation

is required.
Press the [<] button to return to the previous screen with the new

setting configured.
The value to be entered is displayed in enlarged font.

Touch the enlarged value to select one of the digits. The cursor indicates

the selected digit.
Enter the new value using the numeric keypad. You can also increase or

decrease the value incrementally by pressing the [arrow] buttons.
If the relevant equipment is installed on your device, you can press the

[+/-] button to change the sign.
Min: and Max: indicate the limits of the entered value.

Pressing the [OK] button adopts the selected value and the program

returns to the previous screen.
Press the [<] button to return to the previous screen without saving any

changes.
Press the [C] button to delete the new value and restore the previous

value.
PRO bath thermostats and circulation thermostats 67 / 156