Entry Window; Graphics Window - Lauda E 4 G Operating Instructions Manual

ECO GOLD
7.3.3

Entry window

Values are input using the entry window.
Tset
Setpoint Value
Max: 202.0
Min: -30.0
‫ סּ‬OK
ESC
7.3.4

Graphics window

The ECO GOLD thermostats offer you the possibility of displaying temperature measurements graphically.
The temperature traces are displayed in the graphics window
‫ סּ‬Menu
Display
A special feature of a window view is that presented for the programmer. This is described in
detail in section 7.8.
28.04.10/ YACE0088
In the entry window the following information is displayed:
−
−
−
−
25,0
−
−
+/-
−
−
−
In the graphics window the following information is displayed de-
pending on the setting:
−
−
−
−
−
Standby
Putting the device into operation
In the first line the short form of the parameter is located
whose value is to be entered. In the example shown this is
T .
set
The parameter is located underlined below this in plain text.
Max. and Min. state the limits for the value to be entered.
The value to be entered is shown in large characters. The
cursor flashes under the value.
You can change the value with
the two cursor keys pressed, input is speeded up.
By pressing or you can also select numbers individually
and change them with
By pressing (+/-) the arithmetic sign "+" or "-" can be
selected.
You confirm the set value by pressing
By pressing (ESC) you are returned to the menu level
without the value being changed.
The set-point temperature Tset (red).
The internal temperature Tint (in the bath, green).
The temperature on the external load (external temperature
sensor) in text (blue).
The graphical display of the temperature against time.
The colours of the curves correspond to the colours with
which the respective temperature values are highlighted.
or . If you keep one of
or .
.
35