Logging In To The Ibmc Cli Or Webui Of A Server Node Through The Aggregation Network Port - Huawei TaiShan X6000 User Manual

TaiShan X6000 Server
User Guide
12.1.2 Logging In to the iBMC CLI or WebUI of a Server Node
Through the Aggregation Network Port
Procedure
Step 1 Connect a PC to the aggregation network port.
Connect the PC to the aggregation network port using a network cable. See
Figure
Figure 12-4 Connecting a cable to the aggregation network port
Step 2 Connect the PC to the iBMC management network port of the server node.
Connect the PC to the iBMC management network port on the server node using
a network cable. See
Issue 04 (2020-06-05)
After a PC is connected to the iBMC management network port and aggregation
management network port and the iBMC management network port is set as the
aggregation management network port, you can:
● Log in to the iBMC CLI or WebUI of a server node through the aggregation network
port.
● Log in to the HMM CLI through the aggregation network port.
12-4.
Before configuring port aggregation, ensure that the management port is connected with a
network cable. Otherwise, the management connection will be interrupted after the
configuration.
Figure
Copyright © Huawei Technologies Co., Ltd.
12-5.
12 Common Operations
85