Table of Contents
Advertisement
TaiShan X6000 Server
User Guide
Figure 5-2 Connecting a cable to the aggregation network port
Step 2 Set the IP address of the PC.
Set the IP address, subnet mask, or route of the PC and ensure that the PC can
communicate with the aggregation network port.
Run the Ping
check whether the PC can properly communicate with the server.
Step 3 Log in to the HMM CLI.
1.
Issue 04 (2020-06-05)
Aggregation network port IP address command on the PC CLI to
On the PC, double-click PuTTY.exe.
The PuTTY Configuration window is displayed, as shown in
Copyright © Huawei Technologies Co., Ltd.
5 Configuring the X6000
Figure
5-3.
61
Advertisement
Table of Contents
