Table of Contents
Advertisement
TaiShan X6000 Server
User Guide
No.
4
5
6
7
8
Issue 04 (2020-06-05)
Silks
Name
cree
n
Power
button/
indicator
-
Hard disk
fault
indicator
-
Hard disk
activity
indicator
Server health
indicator
Server node
3 health
indicator
Copyright © Huawei Technologies Co., Ltd.
Description
Power indicator
● Off: The server is not connected to a power
source.
● Steady yellow: The server is ready to power on.
● Steady green: The server is properly powered
on.
● Blinking yellow: The iBMC is starting.
Power button
● When the server is powered on, you can press
this button to shut down the OS.
● When the server is powered on, holding down
this button for 6 seconds will power off the
server node.
● When the server is ready to be powered on,
you can press this button to start the server.
● Off: The hard disk is operating properly.
● Blinking yellow: The hard disk is being located,
or the RAID is being reconstructed.
● Steady yellow: The hard drive is faulty, or a
member drive in the RAID array is faulty.
● Off: The hard disk is not detected or is faulty.
● Blinking green: Data is being read from the
hard disk, written to the hard disk, or
synchronized between hard disks.
● Steady green: The hard disk is inactive.
● Off: There is no power supply, or the PSU is
faulty.
● Blinking red at 1 Hz: A major alarm has been
generated on the server.
● Blinking red at 5 Hz: A critical alarm has been
generated on the server.
● Steady green: The server is operating properly.
● Off: There is no power supply, or the PSU is
faulty.
● Blinking red at 1 Hz: A major alarm has been
generated on the server node.
● Blinking red at 5 Hz: A critical alarm has been
generated on the server node.
● Steady green: The server node is operating
properly.
2 Components
7
Advertisement
Table of Contents
