Table of Contents
Advertisement
TaiShan X6000 Server
User Guide
Step 5 Log in to the iBMC WebUI of the server node.
1.
2.
Step 6 Log in to the iBMC CLI of the server node.
Issue 04 (2020-06-05)
▪
Auto: The iBMC network port works as a management or service
network port, depending on the network cable connection.
▪
Aggregation: Use the network port on the HMM as the iBMC
management network port.
▪
If you select Dedicated, set iBMC IP address parameters for the management
network port. If you select OnBoard Shared, set iBMC IP address parameters
for service network ports. If you select Aggregation, set iBMC IP address
parameters for the aggregation network port.
▪
When a LOM network port is selected manually or automatically, the
management and service network ports share a physical network port. You
are advised to configure a virtual local area network (VLAN) for the
management network port for security purposes if Fixed or Automatic is
selected and a LOM network port is configured.
d.
Select Aggregation and press Enter.
Enable port aggregation for each server node.
Open a browser, enter the IP address of the iBMC management network port
in the address box, and press Enter.
On the login page shown in
and click Log In.
Figure 12-10 Logging in to the iBMC
Change the default password when logging in to the iBMC for the first time.
Copyright © Huawei Technologies Co., Ltd.
Figure
12-10, enter the user name and password,
12 Common Operations
90
Advertisement
Table of Contents
