Chapter 8 Chassis Installation; Chassis Cable Routing And Connection; Best Practices And Recommendations; Ecu Cable Connections - Raven Hawkeye Installation Manual

CHAPTER
8

CHASSIS CABLE ROUTING AND CONNECTION

BEST PRACTICES AND RECOMMENDATIONS

• Do not connect battery leads until all cables are installed and connected.
• Route chassis cabling along existing cabling or plumbing to help avoid pinch points or stretching the cable
during normal equipment operation.

ECU CABLE CONNECTIONS

1. Locate the round metal connector and the connector labeled "To Cab Cable" on the supplied chassis cable (P/
N 115-7300-001).
2. Route the connectors to the electrical box on the right side of the machine.
3. Connect the metal connector to the "Chassis Power" connector of the ECU cable.
4. Route the round connector on the Hawkeye power cable (P/N 115-7303-034) to the electrical box on the right
side of the machine.
5. Connect the round connector to the "Hawkeye Power" connector on the ECU Cable.
FIGURE 1. Chassis Cable and Hawkeye Power Cable Connections
Chassis Extension
Connector (P/N
115-7303-201)
(P/N 115-7300-044)

CONSOLE CABLE CONNECTION

1. Route the round "To Cab Cable" connector of the chassis cable toward the access panel in the back right corner
of the cab.
2. Connect the "To Cab Cable" connector to the round 21 pin connector of the console cable (P/N 115-7300-095).
P/N 016-0171-640 Rev. A
C HASSIS INSTALLATION
C H A P T E R 8
(P/N 115-7300-034)
Hawkeye Power
Connection (P/N
115-7303-201)
Chassis Power
Connector (P/N 115-
7303-201)
(P/N 115-7300-001)
33