Lcd Menu Operation; Lcd Touch Screen; Default Screen; Initialization - Sungrow SG4950HV-MV System Manual

LCD Menu Operation

9

9.1 LCD Touch Screen

The eye-level LCD touchscreen inside the monitoring window on the front side of the
inverter is used to view data and set parameters.
User can check or set related data by touching the icons on the LCD display.
For user convenience, a large number of figures of the LCD interface are
provided in this chapter. The parameters and other details in those figures are
indicative only. The actual product you receive may differ.
If the time shown on the LCD panel is different from the actual local time after
time calibration, check and replace the button cells on the back of the LCD
panel.

9.2 Default Screen

9.2.1 Initialization

The LCD is initialized when the intelligent PMD is power on and then enters into the
starting menu.
Appears every time the MV Station is energized. After initialization, the default screen
follows.

9.2.2 Default Screen Introduction

N N o o . .
A
B
C
54
D D e e s s c c r r i i p p t t i i o o n n
Yield data. The first line on the top indicates the present active power;
work state is the transient state of the MV Station.
Today's active power curve to indicate the power percentage (power
value divides the MV Station nominal power value).
DC side voltage and current of the MV Station respectively.