Checking History Alarm; Checking Present Fault Information - Sungrow SG4950HV-MV System Manual

System Manual
step 3 Tap "His-fault" and enter into the history fault sub-menu.
History faults can be viewed from this sub-menu, with up to 5 records can be shown in
one page. The upper left side of the event table is the total number of the current fault
records. Tap "Prev" or "Next" to turn pages up or down.
- - - - E E n n d d

9.9.4 Checking History Alarm

Proceed as follows to check the history warn information:
step 1 Tap "Function" from the default menu.
step 2 Tap "History-information" and enter into the history information sub-menu.
step 3 Tap "his-alarm" and enter into the history alarm sub-menu.
History alarms can be viewed from this sub-menu, with up to 5 records can be shown in
one page. The upper left side of the event table is the total numbers of the current warn
records. Tap "Prev" or "Next" to turn pages up or down.
- - - - E E n n d d

9.10 Checking Present Fault Information

There may be one or more than one fault occurs to one or more than one module inside
the MV Station at the same time which can be viewed through the LCD screen. Follow
the description in this chapter to view the fault information when faults occur.
9 LCD Menu Operation
61