Lcd Menu - Sungrow SH5K-20 User Manual

10 Appendix I: LCD Operation
State
Standby
Turn off
Startup
Upgrade
Error
Off-grid
If the device is in standby mode for more than 10 minutes, please
check:
 Whether the insolation is sufficient and the PV connection is correct.
 Whether the battery level is sufficient and the cable connection is
correct.
 If no anomaly is found, disconnect the DC switch and the main switch
to restart.
 If it still does not work, contact SUNGROW.
10.2

LCD Menu

Abbreviations
Abbreviation
Csmp
Chrg
Bat
SOC
Vtg
Stt
Pwr
Cap
Ver.
74
Description
The inverter waits for sufficient sunlight or battery level, then
the DC voltage recovers. The standby time can be set on the
Webserver. Refer to Chapter 11 for the introductions.
The inverter will stop running by manual "OFF" through the
LCD menu or with the DRM0 command from the DRED. Set to
"ON" if you want to restart the inverter.
The inverter is initializing and synchronizing with the grid.
The DSP or LCD software is in its upgrading process.
If an error occurs, the inverter will automatically stop operation,
trigger the AC relay and show "Error" on the LCD with the
indicator lit.
Once the error is removed in recovery time, the inverter will
automatically resume running. The recovery time can be set
on the Webserver. Refer to Chapter 11 for the introductions.
The system is disconnected from utility grid and runs as a
stand-alone system.
Complete
Consumption
Charge
Battery
State of Charge
Voltage
State
Power
Capacity
Version
Abbreviation
Exp
Tot
Tmp
SOH
Curr
Inv
Frq
DRM
Ref.
User Manual
Complete
Export
Total
Temperature
State of Health
Current
Inverter
Frequency
Demand respond mode
Reference