Lcd Menu Operation; Lcd Touchscreen; Default Screen; Initialization - Sungrow SG2500HV-30 System Manual

LCD Menu Operation

9

9.1 LCD TouchScreen

The eye-level LCD touchscreen inside the monitoring window on the front side of the
inverter is used by the user to view data and set parameters.
For user convenience, there are a large number of pictures of the LCD
interface are provided in this chapter. The parameters and other details in
those pictures are indicative only. The actual product you receive may differ.
If the time shown on the LCD panel is different from the actual local time after
time calibration, check the button cells on the back of the LCD panel and
replace them if necessary.

9.2 Default Screen

9.2.1 Initialization

The LCD is initialized and then enters into the starting menu. The initialization screen
appears every time the inverter is powered on. After initialization, the default screen
follows.

9.2.2 Default Screen Introduction

N N o o . .
A
B
C
D
D D e e s s c c r r i i p p t t i i o o n n
Yield data. The first line on the top indicates the present active power;
and the work state is the transient state of the inverter.
Today's active power curve indicating the power percentage (power
value/the inverter nominal power value).
DC side voltage and current of the inverter
AC side line-to-line voltage and phase current
57