Lcd Menu Operation; Lcd Touch Screen; Default Screen; Initialization - Sungrow SG500MX Operation Manual

6 LCD Menu Operation

6.1 LCD Touch Screen

The LCD touch screen, located at the eye-level in the front side of the inverter, is used for user to
view the data and set related parameters.
The LCD consists of two parts as shown in the following figure. The LEDs indicate the present
working state.
Item
A
B
For user's convenience, there are a large number of pictures about the LCD interface
in this chapter. The parameters and other details in those pictures are indicative
only. The actual product you receive may differ.
If the time shown on the LCD panel is different from the actual local time after time
calibration, please check and replace the button cells on the back of the LCD panel.

6.2 Default Screen

6.2.1 Initialization

The LCD is initialized when inverter is energized and then enters into the starting menu.
18
Fig. 6-1 Location and appearance of the LCD display
Description
Run indicator, red at power on and green in normal operation
Data display and operation area