Lcd Menu Operation (Optional); Lcd Touchscreen; Default Screen; Initialization - Sungrow SG1100UD System Manual

10 LCD Menu Operation (Optional)

10.1 LCD TouchScreen

The eye-level LCD touchscreen inside the monitoring window on the front side of the product
is used by the user to view data and set parameters.
For user convenience, there are a large number of pictures of the LCD interface
are provided in this chapter. The parameters and other details in those pictures
are indicative only. The actual product you receive may differ.
If the time shown on the LCD panel is different from the actual local time after time
calibration, check the button cells on the back of the LCD panel and replace them
if necessary.

10.2 Default Screen

10.2.1 Initialization

After the product is powered on, the LCD screen will enter the initialization screen by default.
After initialization, the default screen will appear.

10.2.2 Default Screen Introduction

Description
No.
Yield data. The first line on the top indicates the present active power, and the
A
work state is the transient state of the MV Station.
Today's active power curve indicating the power percentage (power value/the
B
MV Station nominal power value).
DC side voltage and current of the MV Station.
C
AC side line-to-line voltage and phase current.
D
71