Lcd Menu Operation; Lcd Touchscreen; Default Screen; Default Screen Introduction - Sungrow SG1250UD Operation Manual

6 LCD Menu Operation

6.1 LCD Touchscreen

The LCD touch screen, located at the eye-level in the front side of the inverter, is used for
the user to view the data and set related parameters.
The LCD as shown in the following figure. The user can check or set related data by
touching the icons on the LCD display.
For user's convenience, there are a large number of pictures about the LCD
interface in this chapter. The parameters and other details in those pictures are
indicative only. The actual product you receive may differ.
If the time shown on the LCD panel is different from the actual local time after
time calibration, please check and replace the button cells on the back of the
LCD panel.

6.2 Default Screen

6.2.1 Default Screen Introduction

B
Accessing to submenus mentioned below starts from the default menu.
Fig. 6-1 Location and appearance of the LCD display
E
A
C
D
Item Description
Yield data. The first line from the left
is the present active power; work
A
state is the transient state of the
inverter.
Today's active
indicate the power percentage (power
B
value divides the inverter nominal
power value).
C DC side voltage and current
AC side line-to-line voltage and
D
phase current
E Present date and time
power curve to
19