Displaying The Actual External Temperature - Lauda PROLINE Kryomats RP 4050 C Operation Manual

Enter new setpoint:
Min: -40.00°C Max:202.00°C
1
Help 6 Menu

7.5.2 Displaying the actual external temperature

With all Proline Thermostats an external temperature probe can be connected, which for example....
1. ...can be used as an independent temperature measurement channel.
2. ...can be used as the controlled variable for the bath temperature in applications with a noticeable
temperature gradient (between the internal bath temperature and an external load). The setup is
described in Section 7.5.4. With the function described in the following, you only change over the
display.

Connection of the external Pt100 to the Lemo socket 10S
Contact on
socket 10S
1
2
3
4
 Plug: 4-pole Lemosa for Pt100 connection (Order No. EQS 022).
 Use screened connecting leads. Connect screen to plug case.
50 / 137
123,
45
2 3 4
7 Screen 8 T 9
set
 External actual temperatures can also be read in by interface modules ( 8).
+ I Current circuit
+ U Voltage circuit
- U Voltage circuit
- I Current circuit
 Select desired position with the cursor keys
(black background).
 With the soft key
shown on the left.
 Enter fixed temperature setpoint as described
above and accept into the list with
with
5
 Select and accept values from the list of fixed
T 0
fix
settings as described above for the "Recent
setpoints".
Proline Kryomats
Edit open the window
.
Pt100
DIN EN 60751
or cancel
03/2022