Lauda PROLINE Kryomats RP 4050 C Operation Manual page 86

Status
Setpoint
Identification
Actual Parameters
Pump Menu
Status
Setpoint
Identification
Actual Parameters
Pump Menu
Status
Setpoint
Identification
Actual Parameters
Pump Menu
86 / 137
Start
End T T
set
30,00°C
End T T
set
intern
intern + extern
End T T
set
Proline Kryomats
 The window shown adjacent appears.
 With the menu
Self Adaption can be started. When the Self
Adaption is finished, the test run will be
terminated automatically.
 As soon as start
area the information
Adaption on
the actual status of the test run.
fix
 With the menu
temperature for the test run can be set.
The bath temperature will oscillate less than
about ±15 Kelvin around the set
temperature.
 Change the display in the adjacent window
and accept with
fix
 With the menu
control parameters for internal control or for
the internal control and the external control
can be detected automatically.
To detect the control parameters for the
external application, a temperature probe
must be connected to the thermostat.
fix
Status the test run of the
is pressed, in the sofkey
will be displayed followed by
Setpoint the set
.
Identification the optimal
03/2022