Lauda PROLINE Kryomats RP 4050 C Operation Manual page 72

Command
Status
Edit
Loops
Graph
Info
Pump Menu
No. T end °C
Start 30.00°C
1 30.00°C
Pump Menu
 Using the cursor keys move the black background to the field, which you would like to change. It can be
edited by pressing the key
 The soft key
previous segment with the exception of the Tolerance field. The Tolerance is always specified as 0.00. All
following segment lines will be moved one line downwards.
 In the above window Segment 1 was created in this way.
 Continue with
 If there is no entry in the "Time" field, the bath temperature is approached as quickly as possible. With a time
entry the final temperature is obtained exactly after the time expires (ramp).
 The entry in the field "Tolerance" field defines how accurately the final temperature is to be obtained before
the next segment is processed.

If the tolerance range has been selected too small, it may be that the program does not continue,
because the required tolerance is never achieved.
External temperature control: Especially with ramps, a too close tolerance range can cause undesired
delays in the start phase of the ramp.
72 / 137
Modify
Delete
End T
set
Time [h:m] Tolerance
------- 3.00°C
00:30 3.00°C
End Insert Delete
(see following pages).
Insert inserts in the marked line a new segment that has a default value taken from the
to the fields  "Time"  "Tolerance". See program example in 7.8.1.
Proline Kryomats
Programmer Program1 Edit Modify

 In the Edit
can Modify
 Press the
 Continue to
 There is the possibility of modifying single
segments, i.e. segments can be entered as new,
changed and also deleted.
T
fix
 In the "Start" line enter in the field "T end °C"
the temperature at which the sequence is to
start (default value is 30 °C). A time entry is
not possible in the "Start" segment, because the
thermostat immediately executes Segment 1
on reaching the start temperature.
 Delete single segments (rows) with Delete .
 For thermostats without cooling ability, the
setpoint temperature must be obtainable, i.e.
above the bath temperature displayed at the
time of the program start.
menu one
or Delete a program.
key.
Modify . with the key
03/2022
.