or
Wait 4 seconds or
12!45
Command
Control Variable
Pump
Menu
54 / 137
Change temperature probe source:
1
for the internal probe,
EP
EA
ES
actual values from a PC.
Display flashes 4 s new value is automatically accepted, or
value is immediately accepted with Enter key.
EP EA
If
then the green
°C
external temperature signal.
intern
External Pt100
Analog module
Digital module
End
T
set
Proline Kryomats
only when an external probe is connected,
only when an analog module is connected and configured,
only when a serial module is connected and is continuously receiving
ES
or
has been selected,
LED indicates that the control has regulated to the
Control Variable
Open the device parameter menu with the soft
key
With the cursor keys, change further to
intern
Select other control variables (only displayed
when present) with
T
fix
or quit the window with
changes.
Menu .
Control
Control Variable
is currently active.
or
or End ,
without making any
.
and confirm with
03/2022