Magtek ExpressCard 2000 Manual page 2

INFORMATION IN THIS PUBLICATION IS SUBJECT TO CHANGE WITHOUT NOTICE AND
MAY CONTAIN TECHNICAL INACCURACIES OR GRAPHICAL DISCREPANCIES. CHANGES
OR IMPROVEMENTS MADE TO THIS PRODUCT WILL BE UPDATED IN THE NEXT
PUBLICATION RELEASE. NO PART OF THIS DOCUMENT MAY BE REPRODUCED OR
TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, FOR
ANY PURPOSE, WITHOUT THE EXPRESS WRITTEN PERMISSION OF MAGTEK, INC.
MagTek® is a registered trademark of MagTek, Inc.
MagnePrint® is a registered trademark of MagTek, Inc.
Magensa™ is a trademark of MagTek, Inc.
MagneSafe™ is a trademark of MagTek, Inc.
ExpressCard 2000 is a trademark of MagTek, Inc.
Microsoft® and Windows® are registered trademarks of Microsoft Corporation.
All other system names and product names are the property of their respective owners.
Table 0.1 - Revisions
Rev Number
1.01 09/22/2014
20 01/30/2015
30 03/21/2017
ExpressCard 2000| Instant Issuance Card Personalization System | Hopper Module Replacement Procedure
Copyright © 2006 - 2017 MagTek, Inc.
Printed in the United States of America
Date
Initial release derived from 99875607-5.01-DRAFT
Update preparation steps / hopper transport movement steps
Update and streamline procedure based on design changes;
misc. clarifications and corrections
Page 2 of 42 (D99875700-30)
Notes