Canon STAPLER SORTER-L1/MS-C1 Service Manual page 17

3. Manual insert stapling
Copies may be stapled by inserting them into the top bin and pressing the MANUAL STAPLE
key.
1) Remove all copies from the bin unit.
• The bin unit returns to the home position.
2) Check that the bin unit is at the home position.
Otherwise, switch the copier OFF and then ON.
3) Insert the copies into the top bin of the bin unit along the guide plate.
• The MANUAL STAPLE key blinks.
Make sure that no more than 30 copies (equivalent to paper of 80 g/m
4) Press the MANUAL STAPLE key.
COPYRIGHT © 1998 CANON INC. CANON STAPLER SOTRER-L1 MS-C1 REV.0 NOV. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Bring paper into contact
Figure 1-403
CHAPTER 1 GENERAL DESCRIPITON
2
)
1-9