Basic Operations; Outline; Outline - Canon STAPLER SORTER-L1/MS-C1 Service Manual

II. BASIC OPERATIONS
are executed only on the stapler sorter.)
A. Outline
The sorter sorts and staples copies delivered to it according to the modes selected on the copier.
The delivered copies can be also stapled by operating the operation keys on the copier.
Four operating modes as shown below are available.
1. Non sort mode
2. Sort mode
3. Group mode
4. Stack mode
1. Non sort mode
The machine is equipped with a cascade stacking function. When 100 or fewer copies are to be
made of one original page, all copies will be stacked in the 1st bin.
If 101 or more copies are stacked in the 1st bin, the sorter and the copier will suspend operation.
They will resume operation when all copies have been removed from the bin and the Copy Start
key is pressed.
If 101 or more copies are to be made of one original page or stack mode is selected in
combination with level 2 communication mode (new), 20 copies or 15 copies will be stacked per
bin depending on the size of paper. When copies have been stacked up to the 10th bin, the sorter and
the copier will suspend operation. They will resume operation when all copies have been removed
from the bins and the Copy Start key is pressed.
If the copier requests stapling, the delivered copies will be stapled accordingly.
(Whether the number of copies exceeding the maximum loading value of the sorter can be
designated or not, number of copies stopping the operation, and the method of resuming the
operation vary depending on the specifications of the copier.)
COPYRIGHT © 1998 CANON INC. CANON STAPLER SOTRER-L1 MS-C1 REV.0 NOV. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 2 OPERATIONS AND TIMING
(Stapling operation and alignment operation
2-7