Operation; Operation Panel - Canon STAPLER SORTER-L1/MS-C1 Service Manual

IV. OPERATION
A. Operation panel
No. Name of key
1 Staple key
2 STAPLE
RESUPPLY
indicator
COPYRIGHT © 1998 CANON INC. CANON STAPLER SOTRER-L1 MS-C1 REV.0 NOV. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
(Stapler sorter only)
[1]
Figure 1-401
Function
Press "Manual Staple" or "Manual Insert
Staple" at the start. (The indicator turns on when
stapling is ready.)
If the key is pressed during the stapling process,
the process is discontinued.
The lamp blinks when the staple jam occurs in
the stapler.
The lamp lights up when the staples in the
stapler have exhausted.
The indicator turns on in the absence of a staple
cartridge.
Table 1-401
CHAPTER 1 GENERAL DESCRIPITON
[2]
Remarks
The process cannot
be discontinued
during the manual
insertion/stapling
process
When remaining
staples after the
stapling process are
below 40.
1-7