Changing the General settings
Topics:
•
Changing the date and time
•
Changing the language
•
Changing the beep on empty tray settings
•
Changing the site-specific data (via remote browser only)
Changing the date and time
1. On the Change settings menu, press the Confirm key to select 'General'.
The 'General' screen is displayed:
2. Press the Confirm key to select 'Date & time'.
The 'Date' screen is displayed:
3. Press the up/down arrow keys to increment/decrement the numbers or
the month. Press the left/right arrow keys to move through the digits.
4. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
If you have pressed the Confirm key, the 'Time' screen is displayed:
5. Press the up/down arrow keys to increment/decrement the numbers.
Press the left/right arrow keys to move through the digits.
6. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
Accessing the Change settings menu
Data entry
on page 12
Changing the language
1. On the Change settings menu, press the Confirm key to select 'General'.
The 'General' screen is displayed:
Crystal Imager | Advanced Operation (key-operator mode) | 25
on page 23
3830B EN 20210520 0952