DVS/GSE
DVS
GSE
Field Service Manual
3.1.4.9
Control Board (P/N 08067)
The control board is attached to the inside of the door by several snap-on standoffs and two metal
threaded standoffs with retaining nuts.
1. Disconnect all cables and note original locations.
2. Disconnect ribbon cable from display.
3. Remove nuts from threaded standoffs.
4. Release snap-on standoff retainers by squeezing gently.
5. Remove board.
6. Reverse these steps to install the board.
Webasto Charging Systems, Inc.
29
49
09030-78B
of