Table of Contents
Advertisement
Video Intercom Face Recognition Door Station User Manual
6 Activation
6.1 Activate Device Locally
You are required to activate the device first by settings a strong password for it
before you can use the device.
Steps
1. Power on the device to enter the activation page automatically.
2. Create a password and confirm it.
Note
You can tap
3. Tap Next to finish activation.
Note
We highly recommend you to create a strong password of your own choosing
(using a minimum of 8 characters, including at least three kinds of following
categories: upper case letters, lower case letters, numbers, and special characters)
in order to increase the security of your product. And we recommend you change
your password regularly, especially in the high security system, changing the
password monthly or weekly can better protect your product.
What to do next
After activating the device, the quick configuration page will pop-up automatically.
Refers to Quick Configuration for details.
6.2 Activate Device via Web
Steps
1. The computer and the device should belong to the same subnet.
Note
Default IP Address: 192.0.0.65.
2. Enter the door station IP address into the address bar of the web browser to enter
the activation page.
to enable or disable password reveal.
18
Advertisement
Table of Contents
