HIKVISION DS-KD9633-WBE6 User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Intercom System
  5. DS-KD9633-WBE6
  6. User manual

HIKVISION DS-KD9633-WBE6 User Manual

Video intercom facerecognition door station
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Video Intercom Face Recognition
Door Station
User Manual

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-KD9633-WBE6

Summary of Contents for HIKVISION DS-KD9633-WBE6

  • Page 1 Video Intercom Face Recognition Door Station User Manual...
  • Page 2 WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
  • Page 3 Video Intercom Face Recognition Door Station User Manual CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY...
  • Page 4 Video Intercom Face Recognition Door Station User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or Danger could result in death or serious injury. Indicates a potentially hazardous situation which, if not Caution avoided, could result in equipment damage, data loss,...
  • Page 5 Video Intercom Face Recognition Door Station User Manual Safety Instruction Warning All the electronic operation should be strictly compliance with the electrical safety ● regulations, fire prevention regulations and other related regulations in your local region. Please use the power adapter, which is provided by normal company. The power ●...
  • Page 6 Video Intercom Face Recognition Door Station User Manual Do not leave the battery in an extremely high temperature surrounding ● environment, which may result in an explosion or leakage of flammable liquid or gas. Do not subject the battery to extremely low air pressure, which may result in an ●...
  • Page 7 Video Intercom Face Recognition Door Station User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 8 Video Intercom Face Recognition Door Station User Manual EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/ 65/EU 2012/19/EU (WEEE directive): Products marked with this symbol...
  • Page 9 Video Intercom Face Recognition Door Station User Manual l'appareil ne doit pas produire de brouillage, et l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.

  • Page 10: Table Of Contents

    Video Intercom Face Recognition Door Station User Manual Contents 1 About this Manual ..................1 2 Appearance Description ................2 2.1 Appearance of Door Station ................2 2.2 Appearance of Keypad Module ................. 4 2.3 Appearance Fingerprint Sub Module ..............4 3 Terminal and Wiring Description ..............
  • Page 11 Video Intercom Face Recognition Door Station User Manual 7.2 Authentication via Admin ................35 7.3 Network Parameters Settings ................36 7.3.1 Edit Wired Network Parameters ............. 36 7.3.2 Connect to Wi-Fi ..................37 7.3.3 Cloud Service Settings ................38 7.4 Device No. Settings ..................39 7.5 User Management ..................
  • Page 12 Video Intercom Face Recognition Door Station User Manual 8.2.3 Unlock by Presenting Card ..............52 8.2.4 Unlock by QR Code ................. 52 9 Remote Configuration via Web ..............54 9.1 Live View ......................54 9.2 User Management ..................54 9.3 Device Management ..................55 9.4 Parameters Settings ..................
  • Page 13 Video Intercom Face Recognition Door Station User Manual 10.2.5 Add Device Via EHome ................. 89 10.3 Local Configuration via Client Software ............89 10.4 Device Management ..................89 10.5 Live View ....................... 90 10.6 Intercom Organization Structure Configuration ..........90 10.6.1 Add Organization ..................

  • Page 14: About This Manual

    Video Intercom Face Recognition Door Station User Manual 1 About this Manual Get the manual and related software from or the official website (http:// www.hikvision.com). Product Model Door Station DS-KD9633-E6/DS-KD9633-WBE6...

  • Page 15: Appearance Description

    Video Intercom Face Recognition Door Station User Manual 2 Appearance Description 2.1 Appearance of Door Station Front View Figure 2-1 Front View Table 2-1 Description Description IR Supplement Light Microphone Camera...
  • Page 16 Video Intercom Face Recognition Door Station User Manual Description Ambient Light Sensor Loudspeaker (Only the right side loudspeaker functions) Type-C Interface Rear View Figure 2-2 Rear View Table 2-2 Description Description TAMPER Terminals TF Card Slot MicroUSB Interface Debugging Port...

  • Page 17: Appearance Of Keypad Module

    Video Intercom Face Recognition Door Station User Manual Description Reserved Network Interface 2.2 Appearance of Keypad Module Figure 2-3 Keypad Module Table 2-3 Description Description Keypad Type-C Interface 2.3 Appearance Fingerprint Sub Module...
  • Page 18 Video Intercom Face Recognition Door Station User Manual Figure 2-4 Fingerprint Module Table 2-4 Description Description Fingerprint Reader Keypad Type-C Interface...

  • Page 19: Terminal And Wiring Description

    Video Intercom Face Recognition Door Station User Manual 3 Terminal and Wiring Description Door station can be wired to alarm input interface, alarm input interface, door lock, door contact and so on. Figure 3-1 Terminal and Wiring Description Wiring description:...
  • Page 20 Video Intercom Face Recognition Door Station User Manual AIN1: door contact connection ● AIN2: reserved ● AIN3: exit button connection ● AIN4: fire alarm connection ● NO, COM and NC: door lock connection ● RS-485A: connect to card reader or elevator controller (configured via web). ●...

  • Page 21: Installation

    Video Intercom Face Recognition Door Station User Manual 4 Installation Note Make sure the device in the package is in good condition and all the assembly ● parts are included. The power supply the door station supports is 12 VDC. Please make sure your ●...
  • Page 22 Video Intercom Face Recognition Door Station User Manual Mounting Template Figure 4-1 Mounting Template The dimensions of the mounting template is 113.5 mm (W) × 214 mm (H). Mounting Plate Figure 4-2 Mounting Plate...

  • Page 23: Surface Mounting

    Video Intercom Face Recognition Door Station User Manual The dimensions of the mounting plate is 113.5 mm (W) × 214 mm (H) × 23.5 mm (D). Gang Box Figure 4-3 Gang Box The dimensions of the gang box is 137.75 mm (W) × 261.2 mm (H) × 41.8 mm (D).
  • Page 24 Video Intercom Face Recognition Door Station User Manual Figure 4-4 Fix Mounting Plate 3. Wire the device and cover the rear panel with 2 screws. Apply Sillicone sealant among the joints. Figure 4-5 Seal Rear Panel 4. Fix the device to the mounting plate and fix the device with the set screw.

  • Page 25: Flush Mounting With Gang Box

    Video Intercom Face Recognition Door Station User Manual Figure 4-6 Fix Device 4.1.3 Flush Mounting with Gang Box Steps 1. Cave an installation hole on the wall. Pull out the cable from the wall.
  • Page 26 Video Intercom Face Recognition Door Station User Manual Figure 4-7 Cave Installation Hole Note The suggested dimension of the installation hole is 137.75 mm (W) × 261.2 mm ● (H) × 40.8 mm (D). The suggested length of the cables left outside is 250 mm. ●...
  • Page 27 Video Intercom Face Recognition Door Station User Manual Figure 4-8 Fix Gang Box 3. Remove the mounting ears of the gang box. Figure 4-9 Remove Mounting Ears 4. Wire the device and cover the rear panel with 2 screws. Apply Sillicone sealant among the joint.
  • Page 28 Video Intercom Face Recognition Door Station User Manual Figure 4-10 Seal Rear Panel 5. Fix the door station to the gang box with a set screw. Figure 4-11 Fix Device...

  • Page 29: Install Door Station With Sub Module

    Video Intercom Face Recognition Door Station User Manual 6. Apply Silicone sealant among the joints between the device and the wall (except the lower side) to keep the raindrop from entering. 4.2 Install Door Station with Sub Module Note Accessories that you need to prepare for installation: Mounting template, ●...
  • Page 30 Video Intercom Face Recognition Door Station User Manual Mounting Plate Figure 4-13 Mounting Plate The dimensions of the mounting plate is 113.5 mm (W) × 214 mm (H) × 23.5 mm (D).

  • Page 31: Surface Mounting

    Video Intercom Face Recognition Door Station User Manual Gang Box Figure 4-14 Gang Box The dimensions of the gang box is 137.75 mm (W) × 335.2 mm (H) × 41.8 mm (D). 4.2.2 Surface Mounting...
  • Page 32 Video Intercom Face Recognition Door Station User Manual Steps 1. Paste the mounting template on the wall according to the installation requirements. Drill holes according to the template. Insert the expansion bolts into the screw holes. 2. Fix the mounting plate to the wall with 4 supplied screws. Figure 4-15 Fix Mounting Plate 3.
  • Page 33 Video Intercom Face Recognition Door Station User Manual Figure 4-17 Fix Device 5. Fix the fingerprint module to the device with 2 set screws to complete installaion. Figure 4-18 Fix Fingerprint Module...

  • Page 34: Flush Mounting With Gang Box

    Video Intercom Face Recognition Door Station User Manual 4.2.3 Flush Mounting with Gang Box Before You Start The gang box for flush mounting of the door station with sub module is not contained in the package. Please contact us for purchase need. Steps 1.
  • Page 35 Video Intercom Face Recognition Door Station User Manual 2) Drill 4 screw holes according to the marks on the wall, and insert the expansion sleeves into the screw holes. 3) Fix the gang box with 4 screws. Figure 4-20 Fix Gang Box 3.
  • Page 36 Video Intercom Face Recognition Door Station User Manual Figure 4-21 Remove Mounting Ear 4. Fix the sub module to the door station with 2 set screws. Figure 4-22 Fix Sub Module 5. Wire the device and cover the rear panel with 2 screws. Apply Silicone sealant among the joint.
  • Page 37 Video Intercom Face Recognition Door Station User Manual Figure 4-23 Seal Rear Panel 6. Fix the door station to the gang box with a set screw. Figure 4-24 Fix Device 7. Apply Silicone sealant among the joints between the device and the wall (except the lower side) to keep the raindrop from entering.

  • Page 38: Sub Module Description

    Video Intercom Face Recognition Door Station User Manual 5 Sub Module Description Both keypad module and fingerprint module are supported by the door station. Select a sub module according to your actual needs. Figure 5-1 Keypad Module Figure 5-2 Fingerprint Module After installation, power on the device.

  • Page 39: Activation

    Video Intercom Face Recognition Door Station User Manual 6 Activation 6.1 Activate Device Locally You are required to activate the device first by settings a strong password for it before you can use the device. Steps 1. Power on the device to enter the activation page automatically. 2.

  • Page 40: Activate Device Via Client Software

    Video Intercom Face Recognition Door Station User Manual Caution In order to improve the network security, the set password must be from 8 to 16 digits, and be a combination of at least two or more types of numbers, lowercase letters, uppercase letters, and special characters.
  • Page 41 Video Intercom Face Recognition Door Station User Manual Note When the device is not activated, the basic operation and remote operation of ● device cannot be performed. You can hold the Ctrl or Shift key to select multiple devices in the online ●...

  • Page 42: Local Configuration

    Video Intercom Face Recognition Door Station User Manual 7 Local Configuration 7.1 Quick Configuration After activating the device, the quick configuration page will pop up automatically. Steps 1. Select the system language and tap NEXT. Figure 7-1 Select Language 2. Set network parameters and tap NEXT. - Select Wired Network and set the IP address, Subnet Mask and Gateway manually.
  • Page 43 Video Intercom Face Recognition Door Station User Manual Figure 7-2 Wired Network Parameters Settings - Select Wireless Network and choose an available Wi-Fi to connect.
  • Page 44 Video Intercom Face Recognition Door Station User Manual Figure 7-3 Wireless Network Settings 3. Set password reset method and tap NEXT. - Enter the Reserved Email address, then you can reset the admin password by email. Note On the security questions settings page, you can tap Change to Reserved Email to modify the password reset method.
  • Page 45 Video Intercom Face Recognition Door Station User Manual Figure 7-4 Password Reset by Setting Reserved Email Address - Tap Change to Security Question. Select 3 security questions from deficiency list and enter the answers of the questions, then you can reset the password by answering security questions.
  • Page 46 Video Intercom Face Recognition Door Station User Manual Figure 7-5 Password Reset by Setting Security Questions 4. Enable the cloud service functions and create a verification code. Tap NEXT.
  • Page 47 Video Intercom Face Recognition Door Station User Manual Figure 7-6 Cloud Service 5. Select theme of the system.

  • Page 48: Authentication Via Admin

    Video Intercom Face Recognition Door Station User Manual Figure 7-7 Theme Settings 6. Tap FINISH. 7.2 Authentication via Admin You can configure the parameters of the device on the menu page. You should authenticate to enter the menu. If you want to authenticate via face/card/fingerprints, you should add administrator first.

  • Page 49: Network Parameters Settings

    Video Intercom Face Recognition Door Station User Manual Figure 7-8 Menu Page 7.3 Network Parameters Settings The device support wired network, wireless network and cloud service settings. Note Only parts of the devices support the wireless network, please refers to the actual device for detailed information.

  • Page 50: Connect To Wi-Fi

    Video Intercom Face Recognition Door Station User Manual Steps 1. On the menu, tap Network → Wired Network to enter the settings page. Figure 7-9 Wired Network Settings 2. Edit the wired network parameters. - Edit the wired network parameters manually. - Enable DHCP, and the system will get the parameters automatically.

  • Page 51: Cloud Service Settings

    Video Intercom Face Recognition Door Station User Manual Figure 7-10 Wi-Fi Settings 2. Slide to enable the function. 3. Select a Wi-Fi and enter the password to connect. 7.3.3 Cloud Service Settings Enable the function, you can configure and operate the device via mobile client remotely.

  • Page 52: Device No. Settings

    Video Intercom Face Recognition Door Station User Manual Figure 7-11 Cloud Service Settings 2. Slide to enable the function. 3. Edit the Cloud Service Address and create a Verification Code. 4. Tap √ to save the settings. 7.4 Device No. Settings Configure the No.

  • Page 53: User Management

    Video Intercom Face Recognition Door Station User Manual Figure 7-12 Local Configuration 2. Edit Community No., Building No., Unit No., Floor No. and No. according to the actual needs. 7.5 User Management On the user management page, you can add new users, configure the user's room information, card information, face information, and fingerprint information.

  • Page 54: Call Settings

    Video Intercom Face Recognition Door Station User Manual 1) Tap Card, and tap + to enter the add card page. 2) Enter the card No. manually or present the card in the card presenting area to obtain the card No. 3) Tap OK to enable the settings.

  • Page 55: Forget Admin Password

    Video Intercom Face Recognition Door Station User Manual Figure 7-13 Local Configuration 2. Tap Shortcut Key to select call mode. Calling Menu Select call mode as Calling Menu. On the main page, tap call button to enter the calling page. Call Specified Room Select call mode as Call Specified Room and set the Specified Room No..

  • Page 56: System Settings

    Video Intercom Face Recognition Door Station User Manual Admin password is used for authenticating to enter the local configuration menu. If you forget the password, you can change it by entering security questions' answers. Steps 1. Hold the main page to enter the authentication page. Figure 7-14 Authentication Page 2.

  • Page 57: Adjust Brightness

    Video Intercom Face Recognition Door Station User Manual Before You Start Authenticate and enter the menu first. Refers to Authentication via Admin for details. Steps 1. On the menu, tap Local Configuration to enter the settings page. Figure 7-15 Local Configuration 2.

  • Page 58: Keypad Sound Settings

    Video Intercom Face Recognition Door Station User Manual Figure 7-16 Local Configuration 2. Adjust the brightness of the device. - Enable the Auto Screen Brightness, the device will adjust the brightness according to the environment automatically. - Edit the number to adjust the brightness manually. 7.8.3 Keypad Sound Settings Authenticate and enter the menu first.

  • Page 59: Theme Settings

    Video Intercom Face Recognition Door Station User Manual Before You Start Authenticate and enter the menu first. Refers to Authentication via Admin for details. Steps 1. On the menu, tap Local Configuration to enter the settings page. 2. Slide to enable the function. 7.8.5 Theme Settings Select theme of the system to make the device user friendly.

  • Page 60: Device Information

    Video Intercom Face Recognition Door Station User Manual Figure 7-17 Local Configuration 2. Restore the device. Restore to Default Settings Tap Restore to Default Settings to reset all parameters, except IP address, subnet mask and default gateway, to the default settings. Restore to Factory Settings Tap Restore to Factory Settings to restore all parameters to default settings.
  • Page 61 Video Intercom Face Recognition Door Station User Manual Steps 1. On the menu, tap About to enter the page. Figure 7-18 About 2. You can view the device model, system version, App version and open source software licenses. 3. Optional: Scan the QR code to add the device to mobile client.

  • Page 62: Local Operation

    Video Intercom Face Recognition Door Station User Manual 8 Local Operation 8.1 Call from the Device Door station supports calling users or management center. 8.1.1 Call Resident Call Resident from Main/Sub Door Station Figure 8-1 Call Resident On the main page, tap to enter the calling page.
  • Page 63 Video Intercom Face Recognition Door Station User Manual Note Both the main and sub door station support the elevator control function, ● that is, after calling the residents successfully, tap the unlock button on the indoor station, the elevator will automatically arrive at the floor where the door station is located, and the permission of the floor where the household is located will be opened (The elevator calling will take effect only after the elevator control is configured and the corresponding...

  • Page 64: Call Center

    Video Intercom Face Recognition Door Station User Manual Call Resident from Outer Door Station On the main page of the outer door station, tap Call to enter the calling page. Enter Phase No. + # + Building No. + # + Unit No. + # + Room No., and tap Call again to call residents.

  • Page 65: Unlock By Face

    - Login to the App Store, enter Hikvision Cloud Management in the search box, download and install the iOS version of the mobile client software. - Log in to Hikvision's official website, and click Help → Download → Tools and And Software , download and install the Android version of the mobile client software.
  • Page 66 Video Intercom Face Recognition Door Station User Manual iOS System: iOS 6.0 and above. ● Android System: Android 4.0 and above. ● Here takes Android system as an example. 2. Register user accounts according to the prompts, and login to the client software. 3.

  • Page 67: Remote Configuration Via Web

    Video Intercom Face Recognition Door Station User Manual 9 Remote Configuration via Web 9.1 Live View In the browser address bar, enter the IP address of the device, and press the Enter key to enter the login page. Enter the user name and password and click Login to enter the Live View page. Or you can click Live View to enter the page.

  • Page 68: Device Management

    Video Intercom Face Recognition Door Station User Manual Figure 9-2 Add User 1) Enter Person ID, Name, Floor No.andRoom No.. Select Level. 2) Configure Start Time and End Time. 3) Check Administrator and the person added will be able to log in by face recognition.
  • Page 69 Video Intercom Face Recognition Door Station User Manual You can manage the linked device on the page. Click Device Management to enter the settings page. Figure 9-3 Device Management Add Device Click Add to add the indoor station or sub door station. Enter the ●...

  • Page 70: Parameters Settings

    Video Intercom Face Recognition Door Station User Manual Upgrade Click Timing Upgrade, click to Enable Upgrading Device Automatically and configure Start Time and End Time. The devices will upgrade automatically at the set time. Click Upload Updating Package, select Upgrade File and click Browse to upload upgrading package.

  • Page 71: Local Settings

    Video Intercom Face Recognition Door Station User Manual Click Configuration to set the parameters of the device. Remote configuration in iVMS-4200 and Batch Configuration Tool is the same as that in Web. Here takes the configuration in web for example. Note Run the browser, click →...

  • Page 72: System Parameters

    Video Intercom Face Recognition Door Station User Manual Note Only IE and Google browsers support saving path settings. Other browsers default to the C drive download path. Please refer to the actual device page for more details. 9.4.2 System Parameters Follow the instructions below to configure the system settings, include System Settings, Maintenance, Security, and User Management, etc.
  • Page 73 Video Intercom Face Recognition Door Station User Manual Figure 9-4 Basic Information Click View QR Code, and you can use the mobile client to scan to add the device. You can view the quantities of added users, face pictures and cards in Capacity.
  • Page 74 Video Intercom Face Recognition Door Station User Manual Enable NTP, set the Server Address, NTP Port and Interval. ● Enable Manual Time Sync., set the time manually or check the Sync. with ● computer time. Click Save to enable the settings. About Click About to enter the page.
  • Page 75 Video Intercom Face Recognition Door Station User Manual Restore All Click Restore All to reset all the parameters, except the IP parameters and user information, to the default settings. Unlink APP Account Click Unlink APP Account to unlink the account from the mobile client. Export Parameters 1.
  • Page 76 Video Intercom Face Recognition Door Station User Manual Steps 1. Click Security → Security Service to enter the settings page. Figure 9-6 Security Service 2. On the page, you can enable SSH, ADB remote control and HTTP according to your actual needs.
  • Page 77 Video Intercom Face Recognition Door Station User Manual Steps 1. Select Certificate Type from the drop-list. 2. Click Browser and select the certificate files from the PC. 3. Click Install. Import Communication Certificates Steps 1. Select Certificate Type from drop-list. 2.

  • Page 78: Network Settings

    Video Intercom Face Recognition Door Station User Manual 9.4.3 Network Settings TCP/IP Settings TCP/IP settings must be properly configured before you operate the device over network. The device supports IPv4. Steps 1. Click Network → Basic Settings → TCP/IP to enter the settings page. Figure 9-7 TCP/IP Settings 2.
  • Page 79 Video Intercom Face Recognition Door Station User Manual Steps 1. Click Network → Basic Settings → Port to enter the settings page. 2. Set the ports of the device. HTTP Port The default port number is 80, and it can be changed to any port No. which is not occupied.
  • Page 80 Video Intercom Face Recognition Door Station User Manual Figure 9-8 SIP Settings 2. Check Enable VOIP Gateway. 3. Configure the SIP parameters. 4. Click Save to enable the settings. FTP Settings Steps 1. Click Network → Advanced → FTP to enter the settings page.
  • Page 81 Video Intercom Face Recognition Door Station User Manual Figure 9-9 FTP Settings 2. Check Enable FTP. 3. Select Server Type. 4. Input the Server IP Address and Port. 5. Configure the FTP Settings, and the user name and password are required for the server login.
  • Page 82 Video Intercom Face Recognition Door Station User Manual 8. Click Save to enable the settings. Platform Access Platform access provides you an option to manage the devices via platform. Steps 1. Click Configuration → Network → Advanced Settings → Platform Access to enter the settings page.

  • Page 83: Video & Audio Settings

    Video Intercom Face Recognition Door Station User Manual Click Configuration → Network → Advanced → HTTP Listening to enter the settings page. Figure 9-11 HTTP Listening Settings Enter the parameters according to the page and click Save to enable the function. Capture Network Packet Click Network →...
  • Page 84 Video Intercom Face Recognition Door Station User Manual Figure 9-12 Video Parameters 2. Select the Stream Type. 3. Configure the video parameters. Stream Type Select the stream type to main stream or sub stream. Video Type Select the stream type to video stream, or video & audio composite stream. The audio signal will be recorded only when the Video Type is Video &...
  • Page 85 Video Intercom Face Recognition Door Station User Manual Set the max. bitrate from 32 to 16384 Kbps. The higher value corresponds to the higher video quality, but the better bandwidth is required. Video Encoding The device supports H.264. I Frame Interval Set I Frame Interval from 1 to 400.

  • Page 86: Display Settings

    Video Intercom Face Recognition Door Station User Manual 9.4.5 Display Settings Configure the image adjustment, backlight settings and other parameters in display settings. Steps 1. Click Image → Display Settings to enter the display settings page. Figure 9-14 Display Settings 2.

  • Page 87: Card Security

    Video Intercom Face Recognition Door Station User Manual Figure 9-15 Day/Night Switch Auto Select Day/Night Switch as Auto, and set the Sensitivity. The device will switch between Day Mode and Night Mode automatically according to the environment. Daytime Select Day/Night Switch as Daytime. The device will keep the mode as daytime.

  • Page 88: Intercom Settings

    Video Intercom Face Recognition Door Station User Manual Figure 9-16 Card Security Slide to enable card encryption parameters. Click Save to enable the settings. 9.4.7 Intercom Settings Device No. Configuration Set the No. of the device, and linked devices can build a communication. Steps 1.
  • Page 89 Video Intercom Face Recognition Door Station User Manual Note For main door station (D series or V series), the serial No. is 0. ● For sub door station (D series or V series), the serial No. cannot be 0. Serial No. ●...
  • Page 90 Video Intercom Face Recognition Door Station User Manual Figure 9-19 Password Settings 2. Click +Add to create a password. 1) Create a password. 2) Check to select unlock permission. 3) Optional: Enter the remarks of the password. 3. Click OK to save the password. Call Settings Click Intercom →...

  • Page 91: Access Control Settings

    Video Intercom Face Recognition Door Station User Manual Figure 9-20 Ringtone Settings Note Available Audio Format: WAV、AAC, Size: Less than 600 KB, Sample Rate: 8000Hz, Mono. Number Settings Steps 1. Click Intercom → Number Settings , and you can view the No., room No., and SIP number.
  • Page 92 Video Intercom Face Recognition Door Station User Manual Figure 9-21 Door Parameters 2. Select Door No., and edit the Name. 3. Set Open Duration. When the time to open over the open duration you set, the door will be locked again. 4.
  • Page 93 Video Intercom Face Recognition Door Station User Manual Figure 9-22 Elevator Control 2. Check to enable elevator control function. 3. Select an Elevator No., and select an elevator controller type for the elevator. 4. Select Interface Type. Note If you select Interface Type as RS-485, you only need to enter Negative Floor Capacity.

  • Page 94: Smart Settings

    Video Intercom Face Recognition Door Station User Manual Note Up to 4 elevator controllers can be connected to one door station. ● Up to 10 negative floors can be added. ● Make sure the interface types of elevator controllers, which are connected to ●...
  • Page 95 Video Intercom Face Recognition Door Station User Manual Figure 9-24 Smart Settings Table 9-1 Face Capture Advanced Parameters Parameter Description Face Anti-​ s poofing Enable face anti-spoofing to detect real people face for recognition. Live Face After enabling face anti-​ s poofing function, you can set the Detection Security matching security level when performing live face Level...
  • Page 96 Video Intercom Face Recognition Door Station User Manual Parameter Description When the face recognition time exceed the value you set, Face Recognition the recognition will be determined as a timeout operation. Timeout Value Note You can input the number from 1 to 20. ECO Settings After enabling the ECO mode, the device will use the IR camera to authenticate faces in the low light or dark...

  • Page 97: Theme Settings

    Video Intercom Face Recognition Door Station User Manual Figure 9-25 Area Configuration Drag the frame or enter the digits behind the parameters to adjust the size of the recognition area. 9.4.10 Theme Settings Set the advertisement on the main page of the device. Steps 1.
  • Page 98 Video Intercom Face Recognition Door Station User Manual Figure 9-26 Theme Settings 2. Check to enable screen saving function. 3. Set the advertisement theme. 1) Click + Add Theme. 2) Create a theme name, and select the advertisement body as picture or Video. 3) Click Save.
  • Page 99 Video Intercom Face Recognition Door Station User Manual 7. Optional: Slide to enable show custom content and edit custom content. The custom content displays on the main page of the device. 8. Click Save.

  • Page 100: Remote Configuration Via Client Software

    Video Intercom Face Recognition Door Station User Manual 10 Remote Configuration via Client Software You can set Video Intercom system and manage video intercom products including indoor station, door station and main station via iVMS-4200 client software. 10.1 Edit Device Network Parameters Before You Start Before configuring the device remotely, make sure that the device is activated.

  • Page 101: Add Device Via Ip Address

    Video Intercom Face Recognition Door Station User Manual 4. Enter the device Name, User Name, Password, and click Add. Note Only when the doorphone is added to the client software, you can remotely ● configure the indoor station. Only online devices with the same user name and activation password can ●...

  • Page 102: Add Device Via Ehome

    Video Intercom Face Recognition Door Station User Manual 4. Select the file and click Add to import. Note The file format for batch import is .csv format. 10.2.5 Add Device Via EHome Steps 1. In the device list area, click Add to pop up the device adding dialog box. 2.

  • Page 103: Live View

    Video Intercom Face Recognition Door Station User Manual You can add device, modify device, delete device, perform remote configuration, etc. in device management page. The specific method is similar to web configuration . For details, please refer to the iVMS-4200 client user manual. Note When adding a third-party door station encoding device, the client only supports ●...

  • Page 104: Add Person

    Video Intercom Face Recognition Door Station User Manual 10.7.1 Add Person Steps 1. On the main page of the client, click Person Management to enter the person information configuration page. 2. Select an organization in the organization list and click Add on the person panel to pop up the adding person dialog.

  • Page 105: Modify And Delete Person

    Video Intercom Face Recognition Door Station User Manual 3) Click Start to Scan to add the fingerprint. 4) Click Add to save the fingerprint. Note Only some models of the devices support fingerprint function, please refer to the specific product. 6.

  • Page 106: Get Person Information

    Video Intercom Face Recognition Door Station User Manual Note Click Download Template for Importing Person to download the template. ● The import template contains the following information: person name, gender, ● department code, certificate type, certificate number, phone number and address.

  • Page 107: Permission Settings

    Video Intercom Face Recognition Door Station User Manual 2. Click Settings to set issue card paramrters. - If you set issue card Mode as Local, you need to set Card Issuer, Card Type and Card No., and enable Buzzer and M1 Card Encryption and click OK to issue card.
  • Page 108 Video Intercom Face Recognition Door Station User Manual You can call residents on the video intercom page, and the residents can also call the client software through the indoor station. The door station can also call the client software. Steps 1.

  • Page 109: Search Video Intercom Information

    Video Intercom Face Recognition Door Station User Manual Note One video intercom device can only connect with one client software. ● The maximum ring duration can be set from 15 s to 60 s. ● The maximum speaking duration between the client software and indoor ●...

  • Page 110: Upload Arming Information

    Video Intercom Face Recognition Door Station User Manual You can set the information type as all, advertising Information, property information, alarm information or notice information according to your needs. Time Set the start time and end time of a time period to search the logs. 3.

  • Page 111: Communication Matrix And Device Command

    A. Communication Matrix and Device Command Communication Matrix Scan the following QR code to get the device communication matrix. Note that the matrix contains all communication ports of Hikvision access control and video intercom devices. Figure A-1 QR Code of Communication Matrix Device Command Scan the following QR code to get the device common serial port commands.
  • Page 112 UD27985B...

This manual is also suitable for:

Ds-kd9633-e6

Table of Contents