Activate Device Via Client Software - HIKVISION DS-KD9403-E6 User Manual

Video Intercom Face Recognition Door Station User Manual
Caution
In order to improve the network security, the set password must be from 8 to 16
digits, and be a combination of at least two or more types of numbers, lowercase
letters, uppercase letters, and special characters.
3. If there are multiple door stations in your network, please edit the IP address of
the door station to prevent IP address conflicts from causing abnormal access to
the door station. After logging in the door station, you can click Configuration →
Network → TCP/IP to edit the door station IP address, subnet mask, gateway and
other parameters.

6.3 Activate Device via Client Software

You can only configure and operate the door station after creating a password for
the device activation.
Default parameters of door station are as follows:
Default IP Address: 192.0.0.65.
●
Default Port No.: 8000.
●
Default User Name: admin.
●
Steps
1. Run the client software, click Maintenance and Management → Device
Management → Device to enter the page.
2. Click Online Device.
3. Select an inactivated device and click Activate.
4. Create a password, and confirm the password.
Note
We highly recommend you to create a strong password of your own choosing
(using a minimum of 8 characters, including at least three kinds of following
categories: upper case letters, lower case letters, numbers, and special characters)
in order to increase the security of your product. And we recommend you change
your password regularly, especially in the high security system, changing the
password monthly or weekly can better protect your product.
5. Click OK to activate the device.
19