Table of Contents
Advertisement
Video Intercom Face Recognition Door Station User Manual
4. Enter the device Name, User Name, Password, and click Add.
Note
Only when the doorphone is added to the client software, you can remotely
●
configure the indoor station.
Only online devices with the same user name and activation password can
●
support batch activation.
After the device is added, the device information will be listed in the device list
area.
10.2.2 Add Device via IP Address
Steps
1. In the device list area, click Add to pop up the device adding dialog box.
2. Select the adding mode as IP/Domain Name.
3. Enter the corresponding information of the device: Name, Address, User Name,
and Password.
4. Click Add.
10.2.3 Add Device via IP segment
Steps
1. In the device list area, click Add to pop up the device adding dialog box.
2. Select adding method as IP segment, and enter the corresponding information:
Starting IP Address. Ending IP Address, Port No., User Name, and Password.
3. Click Add.
After adding, the device information will be displayed in the device list area.
10.2.4 Add Devices in Batch
Steps
1. In the device list area, click Add to pop up the device adding dialog box.
2. Select the adding mode as Import in Batch.
3. Click Export Template, and enter the device parameters to be imported according
to the template.
82
Advertisement
Table of Contents
