HIKVISION DS-KD9403-E6 User Manual page 5

Video intercom face recognition door station
Hide thumbs Also See for DS-KD9403-E6:
Table of Contents

Advertisement

Video Intercom Face Recognition Door Station User Manual
Safety Instruction
Warning
All the electronic operation should be strictly compliance with the electrical safety
regulations, fire prevention regulations and other related regulations in your local
region.
Please use the power adapter, which is provided by normal company. The power
consumption cannot be less than the required value.
Please make sure that the power has been disconnected before you wire, install or
dismantle the device.
If the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the device yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
maintenance.)
Caution
Do not drop the device or subject it to physical shock, and do not expose it to high
electromagnetism radiation. Avoid the equipment installation on vibrations
surface or places subject to shock (ignorance can cause equipment damage).
Do not place the device in extremely hot (refer to the specification of the device
or the detailed operating temperature), cold, dusty or damp locations.
The device shall be kept from rain and moisture.
The device shall be kept from explosives.
Keep surfaces of the device clean and dry.
Avoid contact with exposed circuits. Do not touch the exposed contacts and
components when the product is powered on.
Caution
Keep the device away from children and out of reach.
CAUTION: Risk of explosion if the battery is replaced by an incorrect type.
Improper replacement of the battery with an incorrect type may defeat a
safeguard (for example, in case of some lithium battery types).
Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut
the battery, which may result in an explosion.
iv

Advertisement

Table of Contents
loading

Table of Contents