Table of Contents
Advertisement
Video Intercom Face Recognition Door Station User Manual
10.7.1 Add Person
Steps
1. On the main page of the client, click Person Management to enter the person
information configuration page.
2. Select an organization in the organization list and click Add on the person panel to
pop up the adding person dialog.
Note
The Person No. will be generated automatically, and it is editable.
3. Set the person basic information.
1) Enter basic information: name, gender, tel, effective period and E-mail address.
Note
Up to 15 characters are allowed for person name.
2) Click Add face to upload the photo.
Note
The picture should be in *.jpg format.
Upload
Take Photo
Remote
Collection
4. Issue the card for the person.
1) Click Credential → Card.
2) Click + to pop up the Add Card dialog, select Normal Card as Card Type, and
enter the Card No.
3) Click Read and the card(s) will be issued to the person.
5. Add fingerprint permissions for the person.
1) Click Credential → Fingerprint.
2) Select Collection Mode and Collection Recorder.
Click Upload, select the person picture from the local PC to
upload it to the client.
Click Take Photo, and slide to enable device verification. After
the face collector is initialized successfully, you can take a
photo to obtain a face picture.
Click Remote Collection, select the collection device, click the
photo to get the photo, and click OK to complete the
collection.
85
Advertisement
Table of Contents
