Table of Contents
Advertisement
Video Intercom Face Recognition Door Station User Manual
You can set the information type as all, advertising Information, property
information, alarm information or notice information according to your needs.
Time
Set the start time and end time of a time period to search the logs.
3. Click Save.
4. Optional: You can reset the settings or export the notice after the search.
Reset the Settings
Export Search
Results
10.8.3 Upload Arming Information
Steps
1. On the upper-right corner of menu page of the client software, click
→ Device Arming Control to enter the settings page.
2. Slide the slider to set the arming state of the device.
Caution
When the device is added to the client software, the client software will
●
automatically establish an arming connection, and the device is automatically in
the arming state.
Only support 1-channel arming connection. If the device is added to client
●
software A and the automatic arming is successful, the arming connection
cannot be established if you add device to client software B at this time. The
alarm information will only be uploaded to client software A.
Note
After the arming setting, when an alarm occurs, the alarm information can be
●
automatically uploaded to the client software.
After the arming setting, you can view alarm records in the alarm events page.
●
When adding device to the client software, the device will automatically enter
●
arming state by default.
3. Optional: Click Arm All or Disarm All to arm or disarm devices.
Click Reset to reset all the configured search conditions.
Click Export to export the notices to your PC.
91
→ Tool
Advertisement
Table of Contents
