HIKVISION DS-KD9403-E6 User Manual page 78

Video Intercom Face Recognition Door Station User Manual
Steps
1. Click Event → Motion to enter the settings page.
2. Slide Enable Motion Detection to enable the function.
3. Click Draw Area. Click and drag the mouse on the live video to draw a motion
detection area. Click Save to save the settings.
Clear Area
Adjust Sensitivity Move the slider to set the sensitivity of the detection.
Note
Click to start recording, and click again to stop. Click
4. Click Arming Schedule to edit the arming schedule.
Figure 9-16 Motion Detection
Click X to clear all of the areas.
65
to capture images.