Table of Contents
Advertisement
Video Intercom Face Recognition Door Station User Manual
Set the max. bitrate from 32 to 16384 Kbps. The higher value corresponds to
the higher video quality, but the better bandwidth is required.
Video Encoding
The device supports H.264.
I Frame Interval
Set I Frame Interval from 1 to 400.
4. Click Save to save the settings.
Audio Parameters
Steps
1. Click Video/Audio → Audio to enter the settings page.
2. Configure the stream type and the audio encoding type.
Audio Channel
Select the audio channel to adjust the audio parameters.
Stream Type
Select the stream type to main stream or sub stream.
Audio Encoding
The device support G.711ulaw and G.711 alaw.
3. Adjust the Input Volume and Output Volume.
Note
Available range of volume: 0 to 10.
4. Click Save to save the settings.
Figure 9-13 Audio Settings
62
Advertisement
Table of Contents
