HIKVISION DS-KD9403-E6 User Manual page 29

Video Intercom Face Recognition Door Station User Manual
wall, insert the gang box into the installation hole, and mark the gang box screw
holes' position with a marker.
2. Take out the gang box. Drill 4 holes according to the marks on the wall, and insert
the expansion sleeves into the screw holes. Fix the gang box with 4 expansion
bolts. Remove the mounting ears of the gang box.
3. Fix the sub module to the door station with 2 set screws. Wire the device and
cover the rear panel with 2 screws. Insert the door station into the gang box, and
fix it with set screws.
Note
Do not touch the TF card slot and other devices during the process of plugging in
and unplugging the power interface.
Figure 4-8 Flush Mounting
16