Table of Contents
Advertisement
Video Intercom Face Recognition Door Station User Manual
Note
When the device is not activated, the basic operation and remote operation of
●
device cannot be performed.
You can hold the Ctrl or Shift key to select multiple devices in the online
●
devices, and click the Activate button to activate devices in batch.
6.4 Activate Device via Web
You are required to activate the device first by setting a strong password for it before
you can use the device.
Default parameters of the door station are as follows:
Default IP Address: 192.0.0.65.
●
Default Port No.: 8000.
●
Default User Name: admin
●
Steps
1. Power on the device, and connect the device to the network.
2. Enter the IP address into the address bar of the web browser, and click Enter to
enter the activation page.
Note
The computer and the device should belong to the same subnet.
3. Create and enter a password into the password field.
4. Confirm the password.
5. Click OK to activate the device.
20
Advertisement
Table of Contents
