5824 Serial/Parallel Printer Interface Module Installation; 1: Selecting 5824 Options - Honeywell Gamewell-FCI GWF-7075 Installation And Operation Manual

Addressable fire alarm control panel
Table of Contents

Advertisement

5824 Serial/Parallel Printer Interface Module Installation

4.6 5824 Serial/Parallel Printer Interface Module Installation
You can use the 5824 Serial/Parallel Printer Interface Module to connect a printer to the panel. Printing is available for real-time events,
detector status and event history. To install the 5824 Serial/Parallel Printer module, do the following steps:
1.
Make sure power is off at the panel.
2.
Connect the 5824 module to the panel as shown in Figure 4.15.
NOTE: Use four 5824s per panel maximum.
3.
Use the DIP switches on the back of the 5824 board to assign an ID# to the 5824 (see Section 4.8.1).
4.
Configure the 5824 device through programming. See Section 4.6.1.
5.
Connect a printer to the 5824 as shown in Figure 4.15.
4.6.1 Selecting 5824 Options
To configure the 5824 module, do the following steps:
1.
Add the module to the System. JumpStart
Section 7.2.2).
2.
Select a name, if desired (see , "Naming Modules").
3.
Select options for the printer and the output port. See below.
Printer and Output Port Options
1.
From the Main Menu, select 7 for Program Menu.
2.
Select 1 for Module.
3.
Select 1 for Edit Module.
4.
From the list that displays, select the 5824 module you want to configure.
5.
Press <Enter> to bypass the next two screens. A screen similar to the one shown in Figure 4.16 will display.
6.
Select options for the printer as needed for your installation. Most printers are parallel.
7.
If you use a serial printer, use the next screen to select serial port options as required for your printer. Refer to your printer manual
if you need more information.
GWF-7075 Addressable Fire Alarm Control Panel Manual — P/N LS10147-002GF-E:E 06/11/2019
Supervised
Class A Power-Limited
Figure 4.15 5824 Module Connection to the Panel
®
will add the module automatically (see Section 6.1). You can also add it manually (see
Figure 4.16 Selecting Printer and Output Port Options
Option
Baud Rate:
Data Bits:
Stop Bits:
Parity:
Table 4.4 Serial Printer Options
DIP Switches
Parallel
Model 5824 Board
Serial
Choices
75 - 19200
5 - 8
.5, 1, 2
None, Even, Odd
Control Panel Installation
Cable
connectors to
connect to the
printer
25

Advertisement

Table of Contents
loading

Table of Contents