Table of Contents
Advertisement
Using the Built-In Programmer to Edit Text
Appendix A: Using the Built-In Programmer to Edit Text
This section contains tables of programmable characters that you can use for the following labels:
•
device
•
module
Use T9 style editing.
A.1 Characters Used to Edit Text
Table 1.A lists the available characters and their associated numeric designator. When you program, do the fol-
lowing:
1.
Use the <Up> or <Down> arrow key to scroll to the mode you want.
2.
Press the number shown in Table 1.A until the character you selected appears.
3.
Press the <Left> or <Right> arrow for position, and press <Enter> to accept.
A.2 Example Name Edit
1.
Press the <Up> or <Down> arrow key to select the upper case letters mode, Press 2 until "F" appears.
2.
Press the <Up> or <Down> arrow key to change the mode to the lower case letters, Press 3 until "i"
appears.
3.
Press 6 until "r" appears.
4.
Press 2 until "e" appears.
5.
Press 0 to space, then continue to the next word using the same process.
6.
Press <Enter> to accept.
NOTE: After three seconds of no change, the letter will automatically be accepted. Also, if you
press the next number, it will automatically accept the previous selection.
84
GWF-7075 Addressable Fire Alarm Control Panel Manual — P/N LS10147-002GF-E:E 06/11/2019
•
site
•
template
Lower Case Letters
abc1
def2
mno5
pqr6
yz9
Spc0
Upper Case Letters
ABC1
DEF2
MNO5
PQR6
YZ9
Spc0
Numbers and Special Characters
[ ]
1
1
2 ()2
5 ' "5
6 ? !6
9 = -9
00
Table A.1 : Character Table
Figure A.1: Edit Name Example
Characters Used to Edit Text
•
group
•
zone names
ghi3
jkl4
stu7
vwx8
GHI3
JKL4
STU7
VWX8
3 . ,3
4 :;4
7 ' /7
8 – +8
* & @
*
# $ #
Advertisement
Table of Contents
