Setting the Password — PASSWORD Menu
A four-digit password can be specified and applied to
desired menu options to prohibit the menu settings
from being changed without permission. The password
is set with the PASSWORD menu.
A password is always assigned to the PASSWORD
menu (factory setting: 9999).
A password for a service man can be created with the
Structure of the SET UP menu [C] / PASSWORD menu [C3]
INPUT CONFIGURATION C1
SYSTEM CONFIGURATION C4
ON SCREEN SET C5
EXTEND MENU C7
Constituent Menus of the SET UP / PASSWORD Menu
This section describes the functions of the constituent
menus of the SET UP/PASSWORD menu.
• The menu numbers (A, B1, C11 and so on) are not
displayed on the monitor screen.
For details of menu numbers, see page 20.
• An arrow (÷) following the description of an item
or setting in each menu indicates another menu which
appears or an operation which is executed when you
select that menu item or setting. If the description of
an item or setting is not followed by an arrow, it
indicates that selecting the item or setting finishes the
Use of the password
The message "ENTER PASSWORD" is displayed
when an attempt is made to select a menu item for
which the password has been applied. Then, enter the
password using numeric keypad.
If the password is not entered correctly
If an incorrect password is entered, the display returns
to the menu of the previous level.
[C3] PASSWORD menu
Enter the password for the PASSWORD menu.
[C31] PASSWORD menu
Choose what action to perform with the password.
[C311] CHANGE PASSWORD menu
Change the password.
CONTROL PRESET ADJ
COLOR TEMP ADJ
ENTER PASSWORD: Enter the password (factory
setting: 9999). ÷ [C31]
CHANGE PASSWORD...: Change the password.
APPLY PASSWORD...: Assign the password to a
menu item. ÷ [C312]
ENTER NEW PASSWORD: Enter a password. ÷