Sony TRINITRON BVM-20F1U, BVM-20F1E, BVM-20E1U, BVM-20E1E, BVM-14F1U, BVM-14F1E, BVM-14E1U, BVM-14E1E, BVM-14F5U, BVM-14F5E, BVM-14E5 Operation Manual page 36

Adjusting the Color Temperature — COLOR TEMP ADJ Menu
TRIM: Select whether to add the fine adjustment to
the original setting (gain and bias set in
MANUAL menu [B1]).
APPLY: Adds the fine adjustment to the original
setting.
When APPLY is selected, "XX/TRIM"
(XX: the selected color temperature among
STD, COL1 or COL2) appears on the left
top on the COLOR TEMP ADJ menu.
NOT APPLY: Reset the setting to the original
setting (gain and bias set in MANUAL
menu [B1]).
SIGNAL: Select the white signal to be used for
adjustment.
INT: Use an internal signal. Simultaneously with
the adjustment of the gain and bias, the 100
IRE and 20 IRE signals are automatically
switched.
EXT: Use an external input signal. When
adjusting the gain and bias, input the proper
signal.
Note
Even if NOT APPLY of the TRIM item is selected,
pressing the ENTER button to confirm the adjusted
values results in that APPLY will be selected.
32