Download Print this page

Sony BVM-E250 Operation Manual

Professional video monitor.
Hide thumbs

Advertisement

PROFESSIONAL VIDEO MONITOR
BVM-E250
BVM-E170
The supplied CD-ROM includes the Operation Manual for the BVM-E250/E170 (English, French, German,
Italian, Spanish, Simplified Chinese, Traditional Chinese, Korean, and Japanese versions). For more
details, see "Using the CD-ROM Manual" on page 61.
OPERATION GUIDE
1st Edition
[Japanese/English]

Advertisement

   Related Manuals for Sony BVM-E250

   Summary of Contents for Sony BVM-E250

  • Page 1

    PROFESSIONAL VIDEO MONITOR BVM-E250 BVM-E170 The supplied CD-ROM includes the Operation Manual for the BVM-E250/E170 (English, French, German, Italian, Spanish, Simplified Chinese, Traditional Chinese, Korean, and Japanese versions). For more details, see “Using the CD-ROM Manual” on page 61. OPERATION GUIDE...

  • Page 2

    • • •...

  • Page 4

    •...

  • Page 5

    • • • • • • •...

  • Page 6

    • • • • •...

  • Page 9

    • • • • • • • • • • • • • • • • •...

  • Page 10

    • • •...

  • Page 11

    メニューの メニュー内...

  • Page 15

    • • • • •...

  • Page 16

    • •...

  • Page 18

    • • • •...

  • Page 19

    ラ ン プ ラ ン プ ラ ン プ ラ ン プ ラ ン プ...

  • Page 20

    • • •...

  • Page 21

    • •...

  • Page 22

    • • • •...

  • Page 23

    ランプによってエラーや警告を表示することがあります。 詳細については、 をご覧ください。 ラ ン プ ラ ン プ ラ ン プ ラ ン プ ラ ン プ...

  • Page 24

    • • •...

  • Page 25

    • •...

  • Page 26

    • • • • •...

  • Page 33

    • •...

  • Page 35

    • •...

  • Page 37

    Color Setup Component Color Profile Temp Level Level...

  • Page 38

    Select Area Asia Except Japan NTSC Area PAL Area Select Area North America Latin America Africa Australasia Europe Middle-East Asia Except Japan Japan Select Area XXXXXXXXXX Color Temp: Setup Level: Component Level: Color Profile: Select Area Latin America PAL & PAL-N Area Cancel NTSC &...

  • Page 39

    • • • •...

  • Page 40

    Adjustment Picture Adj Auto Auto Adjust Color Bar Restore Factory Data Status Input Port Format Matrix Manual Adjust Copy From Preset Value Other Monitor Monitor ID Memory Stick Color Temp Adj Manual Manual Adjust Original Value Signal Contrast/Bright Hold Auto Auto Adjust Target Color Temp Target Luminance...

  • Page 41

    Channel Configuration Format 3G/HD/SD-SDI Dual Link HD-SDI Composite Component HDMI Input Port DisplayPort Input No Screen Aspect Sync Mode DC 2048 × 1080 HDMI Auto Color Temp Picture Preset Matrix HDMI/DisplayPort Auto Color Profile Color Profile Color Space Gamma ASC CDL File User LUT File...

  • Page 42

    Function Setting Marker Setting Aspect Marker Aspect Marker Aspect Mode Aspect Line Thickness Color Bright Blanking Area Marker 1 Area Marker 1 Aspect Mode Aspect Area Size Width Height Mode Thickness Color Bright Area Marker 2 Area Marker 2 Aspect Mode Aspect Area Size Width...

  • Page 43

    Gamut Error Display Gamut Error Display OSD Notification OSD Notification Reset Input Detection Detection Pixel Threshold Signal Level SDI YCbCr 10bit Upper Limit Y/Cb/Cr Lower Limit Y/Cb/Cr SDI RGB 10bit Upper Limit G/B/R Lower Limit G/B/R SDI YCbCr 12bit Upper Limit Y/Cb/Cr Lower Limit Y/Cb/Cr SDI RGB 12bit Upper Limit G/B/R...

  • Page 44

    System Configuration Network Monitor ID Group ID Network Setting IP Address Subnet Mask Default Gateway Address Protocol Setting SDCP/SDAP Community SDCP Port No SDAP Port No SDAP Broadcast SDAP Broadcast Period Acceptable IP Address Reset Protocol Setting Parallel Remote Parallel Remote 1 Pin - 8 Pin Power Standby Mode...

  • Page 45

    File Management Save To Memory Stick Copy From Other Monitor Monitor ID Memory Stick Delete Memory Stick Data Maintenance Back Up System Data Restore System Data System Status CH Status Port Status Option1-Option4 Model Name Serial No SDI Payload ID Status Payload ID Video Standard Sampling Structure...

  • Page 46

    Controller Network Network Setting IP Address Subnet Mask Default Gateway Address SNMP Setting Contact Name Location Trap Mode Trap Address Setting Trap Address Status Reset Mode/Address Authentication Community Protocol Setting SDCP/SDAP Community SDCP Port No SDAP Port No SDAP Broadcast SDAP Broadcast Period Reset Protocol Setting Function Key...

  • Page 49

    • •...

  • Page 51

    • •...

  • Page 52

    489.8 4-M5 34.4 334.2 6-Ø8...

  • Page 53

    489.8 4-M5 6-Ø8...

  • Page 54

    365.8 134.6 59.95 14.7 23.3...

  • Page 55

    62.3...

  • Page 56

    • Keep these instructions. THIS APPARATUS MUST BE EARTHED. • Heed all warnings. • Follow all instructions. For BVM-E250 only • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings.

  • Page 57

    TV studio). All interface cables used to connect peripherals must be The manufacturer of this product is Sony Corporation, 1- shielded in order to comply with the limits for a digital 7-1 Konan, Minato-ku, Tokyo, 108-0075 Japan.

  • Page 58

    Afin de réduire les risques d’incendie ou d’électrocution, ne pas exposer cet appareil à la Le fabricant de ce produit est Sony Corporation, 1-7-1 pluie ou à l’humidité. Konan, Minato-ku, Tokyo, 108-0075 Japon. Le représentant autorisé pour EMC et la sécurité des Afin d’écarter tout risque d’électrocution, garder...

  • Page 59

    être amené à prendre Für die folgende elektromagnetische Umgebung: E4 des mesures appropriées. (kontrollierter EMV-Bereich, z.B. Fernsehstudio). Der Hersteller dieses Produkts ist Sony Corporation, 1-7-1 Beim BVM-E250/E170 Konan, Minato-ku, Tokyo, 108-0075 Japan. Der autorisierte Repräsentant für EMV und...

  • Page 60: Table Of Contents

    Rear Panel ............76 Environments of the Installation Location ..78 Input Adaptors ..........78 Installing an Input Adaptor (BVM-E250) ..79 Installing an Input Adaptor (BVM-E170) ..80 Attaching the Bracket (BVM-E250) ....82 Mounting the Unit in a Rack (BVM-E170) ..82 Connections (BVM-E250)........

  • Page 61: Using The Cd-rom Manual

    Leaving 40 cm or more of space above the unit is Note recommended for service operation. If you have lost or damaged the CD-ROM, you can purchase a new one to replace it. Contact your Sony service representative. Using the CD-ROM Manual / Precautions...

  • Page 62: Handling The Screen

    Handling the Screen On a Long Period of Use • The panel fitted to this unit is manufactured with high Due to an OLED’s panel structure and characteristics of precision technology, giving a functioning pixel ratio of materials in its design, displaying static images for at least 99.99%.

  • Page 63: On Dew Condensation

    ECO lamp lights in magenta on the front panel for fan error indication, turn off the power and contact an authorized Sony dealer. If you have any questions about this unit, please contact your Sony service representative.

  • Page 64: Functions Supported In Software Version

    Functions Supported in Software Version 1.1 and 1.2 The following new functions are supported for Version 1.1 and Version 1.2 of the BVM-E250/E170. Software Version 1.1 Menu Supported function Automatic color temperature adjustment can be performed using the • Auto built-in color sensor.

  • Page 65: Features

    Multi color space management system with its wide color gamut device, The Sony’s unique OLED panel with a wide color gamut high-resolution/precise gradation display, highly accurate and color management system which uses the unique 3D signal processing and panel correction function.

  • Page 66

    4) HDMI, the HDMI logo and High-Definition Multimedia Interface are For the operation, see “Selecting the Native Scan/Scan trademarks or registered trademarks of HDMI Licensing, LLC. Mode” on the Operation Manual. 5) DisplayPort, DisplayPort logo and VESA are trademarks or registered trademarks of Video Electronics Standards Association.

  • Page 67

    This display is useful higher, and require special third-party software. For for comparing the luminance or color settings of details, contact your Sony representative. neighboring L and R images. Other features L/R switching display (with serial number 7100001 or •...

  • Page 68: Options

    Includes a decoder for analog component signals and BKM-16R Monitor Control Unit analog RGB signals. Input connector for one channel is The BKM-16R is a controller of the BVM-E250/E170 and equipped. you can control multiple monitors from one controller. BKM-243HS HD/D1-SDI Input Adaptor In this manual, the BKM-16R is referred to as the Includes a decoder for serial digital component signals.

  • Page 69

    Input/Output Connectors and Input Adaptors This monitor is equipped with two 3G/HD/SD-SDI input connectors, an HDMI input connector, and a DisplayPort input connector for the standard interface. In this manual, these connectors are referred to as the standard input. By adding the optional input expansion adaptors, the input/output connector panel can be assembled in a wide variety of configurations.

  • Page 70: Location And Function Of Parts

    Location and Function of Parts (BVM-E250) Front Panel 1 Tally lamp 2 OPERATE lamp 3 OVER RANGE lamp 4 ECO lamp a Tally lamp Lights in green when the monitor is put into operation mode from standby mode by pressing the MONITOR I/1 With factory settings, the tally lamp lights when pins No.

  • Page 71

    The OVER RANGE lamp, OPERATE lamp and/or ECO lamp on the front panel may show an error or warning while the monitor is being operated. If the error or warning is shown, please contact your Sony representative. Error display OVER...

  • Page 72: Rear Panel/left Side Panel

    10BASE-T/ 100BASE-TX LAN cable (shielded-type, optional). VORSICHT Aus Sicherheitsgründen nicht mit einem Peripheriegerät- Anschluss verbinden, der zu starke Spannung für diese Buchse haben könnte. Folgen Sie den Anweisungen für diese Buchse. Location and Function of Parts (BVM-E250)

  • Page 73

    Inputs serial digital signals (standard SDI input 1). SDI INPUT 2 connector Inputs serial digital signals (standard SDI input 2). MONITOR OUT connector This is the MONITOR OUT connector for SDI INPUT 1 or SDI INPUT 2 connector. Location and Function of Parts (BVM-E250)

  • Page 74: Location And Function Of Parts

    Location and Function of Parts (BVM-E170) Front Panel 1 Tally lamp 2 OPERATE lamp 3 OVER RANGE lamp 4 ECO lamp a Tally lamp Lights in green when the monitor is put into operation mode from standby mode by pressing the MONITOR I/1 With factory settings, the tally lamp lights when pins No.

  • Page 75

    The OVER RANGE lamp, OPERATE lamp and/or ECO lamp on the front panel may show an error or warning while the monitor is being operated. If the error or warning is shown, please contact your Sony representative. Error display OVER...

  • Page 76: Rear Panel

    Rear Panel 4 DC 5V OUT connector 5 LAN (10/100) connector Handle Handle 6 NETWORK switch 7 PARALLEL REMOTE connector 1 MAIN POWER switch 8 STANDARD PORT 2 DC IN 24 V - 28 V connector 9 HDMI IN connector 3 AC IN connector q;...

  • Page 77

    g PARALLEL REMOTE connector (D-sub 9-pin, i HDMI IN connector female) Inputs the HDMI signal. Forms a parallel switch and controls the monitor HDMI (High-Definition Multimedia Interface) is an externally. The pin assignment and factory setting interface that supports both video and audio on a single function assigned to each pin are given below.

  • Page 78: Environments Of The Installation Location

    Environments of the Input Adaptors Installation Location Each input adaptor can be installed in any input option port on the monitor. Illumination environments The apparent color reproduction on the monitor is greatly Caution affected by ambient light or glare. When you install the following input adaptors to this equipment, use those with the serial numbers given below.

  • Page 79: Installing An Input Adaptor (bvm-e250)

    INPUT 1 INPUT 2 Push the adaptor in until it is firmly fit into the connector inside the monitor, then tighten the two screws to secure the adaptor. OPTION 1 and 2 OPTION 3 and 4 Installing an Input Adaptor (BVM-E250)

  • Page 80: Installing An Input Adaptor (bvm-e170)

    When the BKM-250TG is used, install the Link A signal Installing an Input to INPUT 1, and the Link B signal to INPUT 2. Adaptor (BVM-E170) INPUT 1 Loosen two screws and remove the cover of an input option port on the rear panel of the monitor. Make sure the MAIN Cover of an input INPUT 2...

  • Page 81

    INPUT 1 INPUT 2 For connecting Dual-link HD-SDI signals Two BKM-243HS or BKM-244CC input adaptors or one BKM-250TG input adaptor is required. When the BKM- 243HS or BKM-244CC adaptors are used, install the input For 3D signal analyzing function adaptors in OPTION 1 and 2 option ports, or OPTION 3 and 4 option ports.

  • Page 82: Attaching The Bracket (bvm-e250)

    Use the commercially available screws that match the size of the rack’s holes. Rack Attach a piece of string, etc. to the bracket and secure it to the floor or wall. Bracket String, etc. Attaching the Bracket (BVM-E250) / Mounting the Unit in a Rack (BVM-E170)

  • Page 83: Connections (bvm-e250)

    Connecting the Controller (BKM- Connections (BVM-E250) 16R) Note on connecting the cable to the DC 5V OUT connector BVM-E250 Be sure to plug the male connector of the cable into the DC DC 5V OUT 5V OUT connector of the monitor.

  • Page 84: Connecting The Multiple Units With The Lan

    DC 5V/12V IN LAN (10/100) connector connector Controller (BKM-16R) NETWORK switch tSet to LAN. Turn off the MAIN POWER switch of the monitor before connecting the units. Connect to the network by using a 10BASE-T/ 100BASE-TX cable (shielded-type, optional). Connections (BVM-E250)

  • Page 85: Connections (bvm-e170)

    Connecting the Controller (BKM- Connections (BVM-E170) 16R) Note on connecting the cable to the DC 5V OUT NETWORK switch connector t Set to PEER TO PEER. BVM-E170 Be sure to plug the male connector of the cable into the DC 5V OUT connector of the monitor.

  • Page 86: Connecting The Multiple Units With The Lan

    Connecting the Multiple Units with Notes the LAN • When an optional LAN cable is connected, use a shielded-type cable to prevent a malfunction due to noises. The controller controls up to 32 monitors. Up to four • We recommend to use an optional switching hub controllers are connected to one monitor in single mode.

  • Page 87: Turning On The Power (bvm-e250)

    When you turn on the monitor for the first time after purchasing it, the Select Area screen is displayed. Select the area where you intend to use this monitor. For selecting the area, see page 89. Turning on the Power (BVM-E250)

  • Page 88: Turning On The Power (bvm-e170)

    over the DC power supply. To use the DC power supply, Turning on the Power disconnect the AC power cord. (BVM-E170) Turning on the Monitor Press the MAIN POWER switch on the rear panel to turn Connecting to Power on the power. When you turn on the monitor for the first time after purchasing it, the Select Area screen is displayed.

  • Page 89: Selecting The Area

    Turn on the monitor with the MAIN POWER switch. Selecting the Area The Select Area screen appears. 1 North America When you turn on the monitor for the first time after Select Area 2 Latin America purchasing it, select the area where you intend to use this 3 Africa monitor from among the options.

  • Page 90

    Customers who will use this monitor in the shaded areas shown in the map below should select NTSC Area. Other customers should select PAL Area. Then press the ENTER (Ent) button. Confirm the settings. Select Area XXXXXXXXXX Color Temp: Setup Level: Component Level: Color Profile: Cancel...

  • Page 91: Menu Structure

    Menu Structure For details of each menu, refer to the Operation Manual. Adjustment menu Main menu Level 1 Level 2 Level 3 Level 4 Adjustment Picture Adj Auto Auto Adjust Color Bar Restore Factory Data Status Input Port Format Matrix Manual Adjust Copy From Preset Value...

  • Page 92: Channel Configuration Menu

    Channel Configuration menu Main menu Level 1 Level 2 Level 3 Level 4 Channel Configuration Format 3G/HD/SD-SDI Dual Link HD-SDI Composite Component HDMI Input Port DisplayPort Input No Screen Aspect Sync Mode DC 2048 × 1080 HDMI Auto Color Temp Picture Preset Matrix HDMI/DisplayPort Auto...

  • Page 93: Function Setting Menu

    Function Setting menu Main menu Level 1 Level 2 Level 3 Level 4 Function Setting Marker Setting Aspect Marker Aspect Marker Aspect Mode Aspect Line Thickness Color Bright Blanking Area Marker 1 Area Marker 1 Aspect Mode Aspect Area Size Width Height Mode...

  • Page 94

    Main menu Level 1 Level 2 Level 3 Level 4 Gamut Error Display Gamut Error Display OSD Notification OSD Notification Reset Input Detection Detection Pixel Threshold Signal Level SDI YCbCr 10bit Upper Limit Y/Cb/Cr Lower Limit Y/Cb/Cr SDI RGB 10bit Upper Limit G/B/R Lower Limit G/B/R SDI YCbCr 12bit...

  • Page 95: System Configuration Menu

    System Configuration menu Main menu Level 1 Level 2 Level 3 Level 4 System Configuration Network Monitor ID Group ID Network Setting IP Address Subnet Mask Default Gateway Address Protocol Setting SDCP/SDAP Community SDCP Port No SDAP Port No SDAP Broadcast SDAP Broadcast Period Acceptable IP Address Reset Protocol Setting...

  • Page 96: File Management Menu

    File Management menu Main menu Level 1 Level 2 Level 3 Level 4 File Management Save To Memory Stick Copy From Other Monitor Monitor ID Memory Stick Delete Memory Stick Data Maintenance Back Up System Data Restore System Data System Status menu Main menu Level 1 Level 2...

  • Page 97

    Controller menu / Key Protect menu Main menu Level 1 Level 2 Level 3 Level 4 Controller Network Network Setting IP Address Subnet Mask Default Gateway Address SNMP Setting Contact Name Location Trap Mode Trap Address Setting Trap Address Status Reset Mode/Address Authentication Community...

  • Page 98: Specifications (bvm-e250)

    4) The BVM-E250 individual chromaticity points. The widest color space setting of the signal reproduced Specifications by the BVM-E250 (BVM-E250) 0.681 0.319 0.189 0.724 Picture performance 0.141 0.051 Panel OLED panel (Typical) Picture size (diagonal) 5) For displaying the color gamut of the wide color space mode S-GAMUT, which is available for the 623.4 mm (24...

  • Page 99

    0 °C to 35 °C (32 °F to 95 °F) Recommended: 20 °C to 30 °C (68 °F to 86 °F) Operating humidity 0% to 90% (no condensation) Storage/transport temperature –20 °C to +60 °C (–4 °F to +140 °F) Storage/transport humidity 0% to 90% Specifications (BVM-E250)

  • Page 100: Specifications (bvm-e170)

    365.8 × 205.7 mm • Always verify that the unit is operating properly × 8 inches) before use. SONY WILL NOT BE LIABLE FOR Resolution (H × V) DAMAGES OF ANY KIND INCLUDING, BUT 1920 × 1080 pixels (Full HD)

  • Page 101

    3) Chromaticity point of SMPTE RP 431-2 is not See “Available Signal Systems” and covered in full. “Available Signal Formats” on the 4) The BVM-E170 individual chromaticity points. The Operation Manual. widest color space setting of the signal reproduced by the BVM-E170 Parallel remote D-sub 9-pin (female) (×1) Serial remote (LAN) Ethernet (10BASE-T/100BASE-TX),...

  • Page 102

    TO RECORD CONTENT OF ANY TYPE. Rack mount attachment screws (4) • Always verify that the unit is operating properly Operation Guide (this manual) (1) before use. SONY WILL NOT BE LIABLE FOR CD-ROM (1) DAMAGES OF ANY KIND INCLUDING, BUT Optional accessories...

  • Page 103: Dimensions (bvm-e250)

    When the controller is attached with the Dimensions (BVM-E250) BKM-37H When the tilt unit is removed from the BKM-37H Unit: mm (inches) Front Front 576 (22 551 (21 254 (10) 60 (2 508 (20) Side Side 148 (5 30 (1...

  • Page 104

    When the tilt unit is attached to the BKM-37H When the controller is attached with the BKM-38H Front Front 576 (22 Side Side 30 (1 30 (1 266 (10 266 (10 Bottom Bottom 489.8 (19 4-M5 6-Ø8 30 (1 30 (1 Dimensions (BVM-E250)

  • Page 105: Dimensions (bvm-e170)

    Rear Dimensions (BVM-E170) 352 (13 Unit: mm (inches) Front 436 (17 365.8 (14 131 (5 134.6 (5 When the controller is attached with the BKM-39H Front 59.95 (2 244 (9 368 (14 Side 17 ( 215 (8 438 (17 443 (17 14.7 ( 23.3 ( 40 (1...

  • Page 106

    Side 17 ( 215 (8 62.3 8.7 ( 4.4 ( Dimensions (BVM-E170)

  • Page 107

    The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any portion of this manual or the use thereof for any...

  • Page 108

    Sony Corporation Printed in Japan BVM-E250 (WW) 2012.04 08 BVM-E170 (WW) © 2012 4-274-954-31 (1)

This manual also for:

Bvm-e170

Comments to this Manuals

Symbols: 0
Latest comments: